Skip to the content
2 layers99.1 × 99.1 mmRom carrier, the printed circuit board in 3D

custom 8bit microprocessor project

Size
99.1 × 99.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
34
Pads
116
Tracks, vias
230, 19
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
10 Dec 2024
Updated
9 Sep 2026

Overview

Rom carrier is an open-source printed circuit board by ksmonkey123, from the ksmonkey123/8bit_computer repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.1 × 99.1 mm with 11 parts on 34 nets, routed with 230 tracks and 19 vias.

Its parts include 3 capacitors and 2 ICs.

Parts

11
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
2CCapacitor_SMD:C_0603_1608MetricC2, C3
2Conn_01x16Connector_IDC:IDC-Header_2x08_P2.54mm_HorizontalADDRESS_BUS1, DATA_BUS1
14071Package_DIP:DIP-14_W7.62mm_LongPadsU2
1AT28C64B / AT28C256Package_DIP:DIP-28_W15.24mm_Socket_LongPadsU1
1C_PolarizedCapacitor_SMD:CP_Elec_5x5.3C1

More from ksmonkey123/8bit_computer

12
  • 2 layers99.1 × 99.1 mmBus spy, the printed circuit board in 3D

    Bus spy

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    92 parts1MIT
  • 2 layers99.1 × 99.1 mmDual 8bit register, the printed circuit board in 3D

    Dual 8bit register

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    40 parts1MIT
  • 2 layers99.1 × 99.1 mmMock orchestrator, the printed circuit board in 3D

    Mock orchestrator

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    39 parts1MIT
  • 2 layers99.1 × 99.1 mm16bit register, the printed circuit board in 3D

    16bit register

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    36 parts1MIT
  • 2 layers99.1 × 99.1 mmIncrement register, the printed circuit board in 3D

    Increment register

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    34 parts1MIT
  • 2 layers99.1 × 99.1 mmCommand decoder, the printed circuit board in 3D

    Command decoder

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    34 parts1MIT
  • 2 layers99.1 × 99.1 mmPc-04 alu backplane, the printed circuit board in 3D

    Pc-04 alu backplane

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    28 parts1MIT
  • 2 layers99.1 × 99.1 mmAlu logic, the printed circuit board in 3D

    Alu logic

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    26 parts1MIT
  • 2 layers99.1 × 99.1 mmRam unit, the printed circuit board in 3D

    Ram unit

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    25 parts1MIT
  • 2 layers99.1 × 99.1 mmSequencer, the printed circuit board in 3D

    Sequencer

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    25 parts1MIT
  • 2 layers99.1 × 99.1 mmAlu adder, the printed circuit board in 3D

    Alu adder

    ksmonkey123/8bit_computer

    custom 8bit microprocessor project

    23 parts1MIT

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the Rom carrier PCB?

It measures 99.1 × 99.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rom carrier use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rom carrier KiCad files?

From the ksmonkey123/8bit_computer repository on GitHub, at the commit this page was made from: the board is circuits/pc-14_rom_carrier/rom_carrier.kicad_pcb and its schematic circuits/pc-01_dual_8bit_register/dual_8bit_register.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rom carrier design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).