2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
2 layers81.2 × 113.1 mm
AquaSense
KS-the-CodeWizard/AquaSense-Project- Size
- 81.2 × 113.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 38
- Pads
- 53
- Tracks, vias
- 24, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Apr 2024
- Updated
- 16 Apr 2024
Overview
AquaSense is an open-source printed circuit board by KS-the-CodeWizard, from the KS-the-CodeWizard/AquaSense-Project repository on GitHub. It is a 2-layer board of 81.2 × 113.1 mm with 7 parts on 38 nets, routed with 24 tracks and 0 vias.
It is built around the DS18B20. Its parts include 5 connectors, 1 resistor and 1 IC. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdParts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Battery Connector | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | DS18B20 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | ESP32-DEVKITC-32D | Footprints:MODULE_ESP32-wroom32 | U1 |
| 1 | R | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R1 |
| 1 | TDS Sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | TDS Sensor Connector | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
Questions
How big is the AquaSense PCB?
It measures 81.2 × 113.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AquaSense use?
7 parts, built around the DS18B20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AquaSense KiCad files?
From the KS-the-CodeWizard/AquaSense-Project repository on GitHub, at the commit this page was made from: the board is PCB/AquaSense/AquaSense.kicad_pcb and its schematic PCB/AquaSense/AquaSense.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AquaSense design in my own project?
Its repository states no licence, so its author keeps all rights: ask KS-the-CodeWizard before reusing the design.
Similar boards
- 2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108 - 2 layers80 × 54.9 mm
ESP32WifiAisTempVolt2
AK-Homberger/NMEA2000WifiGateway-with-ESP32
This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.
18 parts94GPL-3.0 - 2 layers52 × 61 mm
Arduino motorfocus
fehlfarbe/arduino-motorfocus
Arduino motorfocus with moonlite protocol for telescopes
23 parts58MIT - 2 layers69 × 57 mm
- 2 layers26 × 34.8 mm
- 2 layers162 × 60 mm
Esp shield
felixwittwer/homeassistant_automaic_greenhouse
A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.
20 parts27 - 2 layers123 × 87.5 mm
FastLOGIC
Neumi/fastLOGIC
An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.
180 parts23MIT