

KiCAD VGA
VGA and FPGAs
- Size
- 63.5 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 24
- Pads
- 105
- Tracks, vias
- 85, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 May 2020
- Updated
- 25 Sep 2022
Overview
KiCAD VGA is an open-source printed circuit board by kromych, from the kromych/fpga-vga repository on GitHub. It is a 2-layer board of 63.5 × 50.8 mm with 27 parts on 24 nets, routed with 85 tracks and 6 vias.
Its parts include 21 resistors and 2 connectors.
README
readme.mdVGA and FPGAs
The blue, green, red componenets support 4 levels of brightness.
See Simulations 01, Simulations 10 and Simulations 11 for the details of the DAC implementation (modeled with Electronic Circuit Simulator).
Here are the TinyFPGA BX and the 4-bit DAC that on the the breadboard that are connected to a VGA input. KiCAD schematic and the rendered pdf are under the kicad directory.
Installing tools
- Yosys FPGA toolchain: https://github.com/YosysHQ/fpga-toolchain/releases
- Tinyprog to program TinyFPGA BX:
pip install tinyprog
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 3 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17, R19, R21 |
| 3 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16, R18, R20 |
| 3 | 15 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R5 |
| 3 | 20 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6 |
| 3 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R12, R14 |
| 3 | 30 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R9 |
| 3 | 510 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11, R13, R15 |
| 1 | RGB, Sync TTL In | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J1 |
| 1 | VGA Out | Connector_Dsub:DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm | J2 |
Similar boards
- 2 layers47.6 × 27.3 mm

- 2 layers77.4 × 77.4 mm

CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm

- 2 layers40 × 40 mm

- 2 layers22 × 42 mm

Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm

PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm

AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm

Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223
Questions
How big is the KiCAD VGA PCB?
It measures 63.5 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the KiCAD VGA use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KiCAD VGA KiCad files?
From the kromych/fpga-vga repository on GitHub, at the commit this page was made from: the board is kicad/KiCAD-VGA/KiCAD-VGA.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the KiCAD VGA design in my own project?
Its repository states no licence, so its author keeps all rights: ask kromych before reusing the design.