

Main pcb
Custom low-profile mechanical split keyboard largely inspired by Corne v3.
- Size
- 147.4 × 112.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 97
- Pads
- 801
- Tracks, vias
- 2,598, 292
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Nov 2025
- Updated
- 26 Apr 2026
Overview
Main pcb is an open-source printed circuit board by krlberg, from the krlberg/hormesis-keyboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 147.4 × 112.6 mm with 81 parts on 97 nets, routed with 2,598 tracks and 292 vias.
Its parts include 50 diodes and 26 switches. It belongs with the keyboards and input boards of this library.
README
README.mdHormesis Keyboard
A custom low-profile wireless split mechanical keyboard, inspired by the Corne v3.
Overview
| Spec | Detail |
|---|---|
| Keys | 50 (split 25/25) |
| Layout | 5×6 column stagger per half + 3-key thumb cluster |
| Profile | Low-profile |
| Wireless | Bluetooth 5.0, up to 5 device profiles |
| Controller | nice!nano v2 (nRF52840) |
| RGB | WS2812 underglow, 25 LEDs per half |
Repository Structure
hardware/
├── kicad/ KiCAD PCB schematic and layout
├── footprints/ Ergogen custom footprints
├── output/ Generated outputs (gerbers, outlines, cases)
├── top_plate/ Top plate Ergogen design
├── firmware/ Pre-built .uf2 files ready to flash
└── config.yaml Ergogen PCB config
boards/ ZMK shield definition (hormesis_left / hormesis_right)
config/ ZMK keymap and firmware config
zephyr/ ZMK module config
build.yaml ZMK GitHub Actions build targets
.github/workflows/ Auto-build firmware on pushLayout
1 2 3 4 5 6 7 8 9 0
TAB Q W E R T Y U I O P ESC
CAP A S D F G H J K L ; SFT
Z X C V B N M , . /
CTL ALT GUI SPC FN BSPFn Layer (hold FN)
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
` ! @ # $ % ^ & * ( ) DEL
_ _ - = [ ] LFT DWN UP RGT ' ENT
BTC BT0 BT1 BT2 BT3 BT4 RGB H+ S+ \
USB BLE TOG BRI EFF BOTBTC = clear BT, BT0–4 = select profile, RGB = toggle underglow, H+/S+ = hue/saturation, BRI = brightness, EFF = next effect, BOT = bootloader, USB/BLE/TOG = output source.
Flashing Firmware
Pre-built .uf2 files are in hardware/firmware/:
hardware/firmware/hormesis_left-nice_nano_v2.uf2
hardware/firmware/hormesis_right-nice_nano_v2.uf2- Double-tap the reset button on the nice!nano — it mounts as a USB drive (
NICENANO). - Drag the matching
.uf2file onto the drive. - Flash left first, then right.
Customizing Keymaps
Edit the keymap in config/hormesis.keymap, push to GitHub, and the Actions workflow auto-builds new firmware. Download from the Actions tab.
ZMK Studio (GUI, no recompile): Add CONFIG_ZMK_STUDIO=y to config/hormesis.conf, rebuild, flash, then use zmk.studio to remap keys live over USB or BLE.
Bill of Materials
| Part | Qty |
|---|---|
| nice!nano v2 | 2 |
| Low-profile MX switches | 50 |
| Low-profile keycaps | 50 |
| WS2812B LEDs | 50 (25 per half) |
| SOD-123 diodes | 50 |
| JST PH 2.0 battery connector | 2 |
| LiPo battery (301230 or similar) | 2 |
| Reset switch (3×6mm SPST) | 2 |
PCB Fabrication
Gerbers are in hardware/kicad/gerber/. Recommended fab settings:
- Layers: 2
- Thickness: 1.6 mm
- Surface finish: HASL or ENIG
- Quantity: 5 (gives 2 full keyboards + spares)
License
MIT
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | ComboDiode | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +9 | |
| 25 | PG1350 | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +9 | |
| 25 | WS2812B | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +9 | |
| 2 | JST_PH_S2B-PH-K_02x2.00mm_Angled | JST1, JST2 | |
| 2 | Panasonic_EVQPUL_EVQPUC | Panasonic_EVQPUL_EVQPUC | B1, B2 |
| 1 | ceoloide:mcu_supermini_nrf52840 | MCU1 | |
| 1 | power_switch | SW1 |
Similar boards
- 2 layers162.9 × 178.9 mm

- 2 layers177.2 × 114.3 mm
/Revision%201.3%20(FLASH%20Edition)/KiCAD/8-Bit%20CPU%2032k.kicad_pcb.jpg?size=s&soon)
8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
81 parts184 - 2 layers

- 2 layers64 × 55 mm

Zynthiandac bk2
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
81 parts156 - 2 layers

- 2 layers41.9 × 62.8 mm

- 2 layers38.6 × 38.6 mm

IotLedDriver
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
81 parts94BSD-3-Clause - 2 layers98.5 × 45.4 mm

Idawgz32
ChrisChrisLoLo/idawgz32
A full 32 key mechanical keyboard that can be made for only $5
81 parts77GPL-3.0
Questions
How big is the Main pcb PCB?
It measures 147.4 × 112.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Main pcb use?
81 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main pcb KiCad files?
From the krlberg/hormesis-keyboard repository on GitHub, at the commit this page was made from: the board is hardware/kicad/main_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main pcb design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).