
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A versatile macropad powered by the RP2040 (Seeed Studio Xiao RP2040)
Hackpad is an open-source printed circuit board by kristoferkp, from the kristoferkp/sugarpad repository on GitHub. It is a 2-layer board of 81 × 81 mm with 30 parts on 27 nets, routed with 155 tracks and 10 vias.
Its parts include 12 diodes, 12 switches, 1 IC and 1 connector. It belongs with the RP2040 boards of this library.
A versatile macropad powered by the RP2040 (Seeed Studio Xiao RP2040)

The sugarpad is powered by QMK (with VIA support). sugarpad is a 11-key macropad with a rotary encoder (with built in switch) and an OLED screen.
The sugarpad is part of Hackclub's Hackpad project!
With VIA, you can easily switch out the keymap of the macropad and record macros.
By default the 1st layer is a numpad, the rotary encoder play/pauses music and changes volume. The keys under the encoder switch layers.
There are a total of 4 layers. 2nd and 3rd layers are F0-F21 and the final layer is unmapped.
By default the OLED screen shows the layer you are on.
The PCB was built with KiCad.

The case can be printed in 3 parts - the bottom, the plate and the top. The case uses 4 M3x16 screws and 4 M3x5x4mm heatset inserts.

Small amount of supports are required (USB-C hole, heatset insert holes)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Diode | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 11 | Keyswitch | ScottoKeebs_MX:MX_PCB_1.00u | S1, S2, S3, S4, S5, S6, S7, S8, S9, S11, S12 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 1 | OLED_128x32 | ScottoKeebs_Components:OLED_128x32 | J1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_MountingHoles | SW1 |
| 1 | XIAO-RP2040-DIP | ScottoKeebs_MCU:Seeed_XIAO_RP2040 | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 81 × 81 mm and has 2 copper layers, 1.6 mm thick.
30 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kristoferkp/sugarpad repository on GitHub, at the commit this page was made from: the board is pcb/Hackpad.kicad_pcb and its schematic pcb/Hackpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kristoferkp before reusing the design.