
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

TASK 5 is an open-source printed circuit board by KrishPrakash2310, from the KrishPrakash2310/RoverX repository on GitHub. It is a 2-layer board of 58.5 × 58.7 mm with 21 parts on 34 nets, routed with 157 tracks and 4 vias.
Its parts include 8 resistors, 8 diodes, 2 ICs, 1 connector and 1 switch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LED | LED_SMD:LED_0201_0603Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | R | Resistor_SMD:R_0201_0603Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 2 | ~ | BC501SM:DIL14 | U1, U2 |
| 1 | Battery | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BT1 |
| 1 | Conn_01x08_Pin | Connector_JST:JST_EH_B8B-EH-A_1x08_P2.50mm_Vertical | J2 |
| 1 | SW_DIP_x08 | Button_Switch_SMD:SW_DIP_SPSTx08_Slide_6.7x21.88mm_W6.73mm_P2.54mm_LowProfile_JPin | SW1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 58.5 × 58.7 mm and has 2 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KrishPrakash2310/RoverX repository on GitHub, at the commit this page was made from: the board is LED_7408_TASK/TASK_5.kicad_pcb and its schematic LED_7408_TASK/TASK_5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KrishPrakash2310 before reusing the design.