

Skean
Wireless-first 44-key split keyboard with the Jian's stagger and the Corne's thumb cluster
- Size
- 153.2 × 95.3 mm
- Copper layers
- 2
- Thickness
- 0.81 mm
- Parts
- 80
- Nets
- 65
- Pads
- 581
- Tracks, vias
- 1,661, 303
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 9 Jan 2022
- Updated
- 11 Oct 2023
Overview
Skean is an open-source printed circuit board by krikun98, from the krikun98/Skean repository on GitHub. It is a 2-layer board of 153.2 × 95.3 mm with 80 parts on 65 nets, routed with 1,661 tracks and 303 vias.
It is built around the E73-2G4M08S1E, TP4054 and USBLC6-2SC6, with the XC6220B331MR-G and AO3407 among its other parts. Its parts include 25 diodes, 23 switches, 9 resistors, 5 capacitors and 4 ICs. It belongs with the keyboards and input boards of this library.
Main components
5E73-2G4M08S1E
SMDIntegrated antenna SMD RF Modules ROHSChengdu Ebyte Elec TechRF ModulesTP4054
SOT-23-5L-40℃~+85℃ 1 25uA 4.2V 4.2V~6.5V 500mA Charging IC Lithium Battery Not supported 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 SOT-23-5L Battery Management ROHSUMWBattery ManagementUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)XC6220B331MR-G
SOT-25-40℃~+85℃ 1 1A 3.3V 50dB@(1kHz) 655mV@(1A) 6V 8uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Output discharge Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAO3407
SOT-23-55℃~+150℃ 1 P-Channel 1.4W 1V 260pF 30V 37pF 4.1A 75mΩ@4.5V P-Channel ±20V SOT-23 MOSFETs ROHSBORNMOSFETs
README
README.mdSkean
The Skean is a 44-key split keyboard inspired by the Jian (stagger, pinky and controller footprint) and the Corne (thumb cluster). The module placement was inspired by pashutk's kbd533 project.
The Skean is a fully wireless split built with E73 nRF52833 modules. It's got side-mounted power and reset switches, USB-C ports, fuses and ESD protection. It also has 310 mAh batteries in each half - about three times the capacity of a typical "under the nice!nano" battery. Despite all that, with specific switches (Alps, Matias, Gateron Cap or etc.) and thin PCBs it can be built with 8 mm. standoffs - the same thickness as a regular hotswap Corne. You are giving up the hotswap capability, but not much else.
And with the V0.3 hotswap PCB you don't even have to give that up! With 301230 batteries between the PCB and plate the Skean can mount regular MX switches while remaining thin and sleek.
Features
- Wireless with a built-in E73 module
- ZMK support (currently via a config template)
- Fuses and ESD protection
- MX or Alps compatibility
- Meant for 233350 310 mAh batteries under the PCB or 301230 between the PCB and plate
- Math-generated silkscreens on some case/plate versions
- 6 column version also available for 100x150 PCB promos
Download
You can download Gerber and DXF files in the releases section. More images are also in Actions builds.
Instructions
Firmware
The bootloader is available in the Releases tab. Please refer to the nrfmicro wiki for the flashing instructions. It's the same as the nrfmicro_833 bootloader with a modified USB device name.
Default firmware files are also there, and you can use the Skean config template for customization.
IMPORTANT NOTE: if your Skean was flashed with the bootloader from the 0.2 release, you need to flash the update UF2 to use the latest ZMK version. More info is available in the Releases tab.
BOM/Build instructions
Please refer to the public Skean wiki.
For building the artifacts locally you need Docker.
Just run the build.sh script.
However, everything is built in Actions. Check the Actions tab or releases for files not linked here.
Links
Version 0.3
MX hotswap
Full 7-column MX hotswap PCB
| front | back |
|---|---|
![]() | ![]() |
6-column MX hotswap version
| front | back |
|---|---|
![]() | ![]() |
Soldered
Soldered V0.3 PCBs have compatibility for:
- MX
- Alps SKCM
- Alps SKCC
- i-Rocks
- Hi-Tek 725
- Omron B3G-S
- Futaba MA
Full 7-column PCB
| front | back |
|---|---|
![]() | ![]() |
6-column version
| front | back |
|---|---|
![]() | ![]() |
All the case files labeled "plastic" have the switch holes adjusted(0.25 mm. smaller in both dimensions). If your laser cutter has different tolerances - adjust them and re-run the build script.
Parts
80| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | D_Small | kbd:D3_SMD | D1, D2, D3, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 +6 |
| 21 | KEYSW | kbd:MX-HS-SOL-1U-REV | K1, K2, K3, K4, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21 +5 |
| 7 | MountingHole | kbd:M2-MountingHole-Standoff | H0, H1, H2, H3, H4, H5, H6 |
| 2 | 10pF | kbd:C_0603_1608Metric_REV | C1, C2 |
| 2 | 1K | kbd:R_0603_1608Metric_REV | R7, R9 |
| 2 | 4.7uF | kbd:C_0603_1608Metric_REV | C4, C5 |
| 2 | 5.1K | kbd:R_0603_1608Metric_REV | R4, R5 |
| 1 | 100K | kbd:R_0603_1608Metric_REV | R6 |
| 1 | 1M | kbd:R_0603_1608Metric_REV | R10 |
| 1 | 1N5819 | kbd:D_SOD-323_HandSoldering_REV | D23 |
| 1 | 1nF | kbd:C_0603_1608Metric_REV | C3 |
| 1 | 2M | kbd:R_0603_1608Metric_REV | R3 |
| 1 | 32.768kHz | kbd:Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm_HandSoldering_REV | X1 |
| 1 | 500mA | kbd:Fuse_1206_3216Metric_REV | F1 |
| 1 | 806K | kbd:R_0603_1608Metric_REV | R2 |
| 1 | AO3407 | kbd:SOT-23_Handsoldering_REV | Q2 |
| 1 | BLUE | kbd:LED_0603_1608Metric_REV | D25 |
| 1 | Conn_01x02_Female | kbd:Battery_TH | J4 |
| 1 | E73-2G4M08S1E | kbd:E73-2G4M08S1E-52833_REV | U1 |
| 1 | KEYSW | kbd:MX-HS-SOL-1.5U-REV | K22 |
| 1 | RED | kbd:LED_0603_1608Metric_REV | D24 |
| 1 | RPROG | kbd:R_0603_1608Metric_REV | R8 |
| 1 | SWD | kbd:connector_swd_REV | J2 |
| 1 | SW_PUSH | kbd:SW_SPST_EVQP7C_REV | RSW1 |
| 1 | SW_SPDT | kbd:SW_SPDT+H-MSK12C01_hor(7pin_SMD)_REV | SW1 |
| 1 | TP4054 | kbd:SOT-23-5_HandSoldering_REV | U3 |
| 1 | USB-C Conn | kbd:USB-C_C168688_REV_V2 | J3 |
| 1 | USBLC6-2SC6 | kbd:SOT-23-6_Handsoldering_REV | U4 |
| 1 | XC6220B331MR-G | kbd:SOT-23-5_HandSoldering_REV | U2 |
Similar boards
- 2 layers26.5 × 42 mm

- 2 layers219.4 × 78 mm

- 2 layers133 × 114.7 mm

- 2 layers225 × 74.8 mm

- 2 layers285 × 94.6 mm

Ptm-60nrf
tabbeber/tom60pcb
Poker tray mount PCB using nRF52840-based holyiot chip
141 parts1BSD-2-Clause - 2 layers53.3 × 24.1 mm

NumDisciplineBLE
ericrlau/NumDisciplineBLE
BLE Breakout Board To Replace ATMega Used In NumDiscipline
20 partsGPL-3.0 - 2 layers18 × 33.4 mm

- 2 layers23.9 × 52 mm

Questions
How big is the Skean PCB?
It measures 153.2 × 95.3 mm and has 2 copper layers, 0.81 mm thick.
What parts does the Skean use?
80 parts, built around the E73-2G4M08S1E, TP4054, USBLC6-2SC6 and XC6220B331MR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Skean KiCad files?
From the krikun98/Skean repository on GitHub, at the commit this page was made from: the board is pcb/pinky_hotswap/skean.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Skean design in my own project?
Its repository states no licence, so its author keeps all rights: ask krikun98 before reusing the design.








