2 layers42.5 × 38.1 mm
2 layers48.9 × 56.6 mm
Display breakout
Kriegbaum/oled-breakoutBreakout board for Crystalfontz 128x128 Oled display
- Size
- 48.9 × 56.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 19
- Pads
- 93
- Tracks, vias
- 168, 19
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Jul 2023
- Updated
- 21 Jul 2023
Overview
Display breakout is an open-source printed circuit board by Kriegbaum, from the Kriegbaum/oled-breakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 48.9 × 56.6 mm with 33 parts on 19 nets, routed with 168 tracks and 19 vias.
It is built around the MP3216GJE-P, CL21A475KAQNNNE and CL21B105KBFNNNG, with the B0540WS-TP, CL21B104KBCNNNC and QBLP615-R among its other parts. Its parts include 9 capacitors, 6 resistors, 2 ICs, 2 diodes and 1 connector. It belongs with the lEDs and displays and interfaces and adapters boards of this library.
Main components
9
MP3216GJE-P
TSOT-23-5-40℃~+85℃@(TA) 1 1.3MHz 2.5V~36V 2.5V~6V 750mA Boost Boost Built-in No TSOT-23-5 DC-DC Converters ROHSMonolithic Power SystemsDC-DC Converters
CL21A475KAQNNNE
080525V 4.7uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCL21B105KBFNNNG
08051uF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
B0540WS-TP
SOD-323-55℃~+125℃ 1 Independent 40V 500mA 550mV@500mA 5A 80uA@40V SOD-323 Schottky Diodes ROHSMicro Commercial ComponentsSchottky DiodesCL21B104KBCNNNC
0805100nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
QBLP615-R
1206LED Indication - DiscreteQT Brightek
RNCP0805FTD1K00
0805-55℃~+155℃ 1kΩ 200V 250mW Thin Film Resistor ±1% ±100ppm/℃ 0805 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface MountUMK212B7474KG-T
0805470nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMT
YC124-JR-0710KL
0402x410kΩ 4 62.5mW 8 ±200ppm/℃ ±5% 0402x4 Resistor Networks, Arrays ROHSYAGEOResistor Networks & Arrays
README
README.mdoled-breakout
Breakout board for Crystalfontz 128x128 Oled display
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | , , , , , | ||
| 4 | CL21A475KAQNNNE | dowloaded_parts:0805_cap | C2, C3, C6, C7 |
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 2 | CL21B105KBFNNNG | dowloaded_parts:0805_cap | C8, C9 |
| 1 | B0540WS-TP | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | CFAL128128A0-015Y | dowloaded_parts:CFAL128128A0-015 | U2 |
| 1 | CL21B104KBCNNNC | dowloaded_parts:0805_cap | C4 |
| 1 | CS050Z24G-A0 | dowloaded_parts:CS050Z24GA0 | C1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | MP3216GJE-P | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | QBLP615-R | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | RC0805FR-071M1L | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | RC0805FR-0754K9L | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | RC0805FR-075K1L | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | RC0805JR-0710KL | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | RNCP0805FTD1K00 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | SDEM25201B-150MS | Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L1 |
| 1 | UMK212B7474KG-T | dowloaded_parts:0805_cap | C5 |
| 1 | YC124-JR-0710KL | dowloaded_parts:Resistor_Array_0805_x4 | R5 |
The 31 most common of 33 parts.
Questions
How big is the Display breakout PCB?
It measures 48.9 × 56.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Display breakout use?
33 parts, built around the MP3216GJE-P, CL21A475KAQNNNE, CL21B105KBFNNNG and B0540WS-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Display breakout KiCad files?
From the Kriegbaum/oled-breakout repository on GitHub, at the commit this page was made from: the board is display_breakout.kicad_pcb and its schematic display_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Display breakout design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers54.4 × 53.3 mm
- 4 layers52.8 × 22.9 mm
- 4 layers100 × 100 mm
PCB EU
nikolajevs/PCB_EU
Сохраняются функции PCBV1: два LED-канала с общей яркостью, два независимых PWM/тахоканала вентиляторов, PTC, помпа, SHT4x, поплавок, RTC с CR2032, microSD, Wi-Fi и существующие функции интерфейса/расписаний.
201 parts - 2 layers40 × 24 mm
Preamp
M4a1x/nmr-spectrometer
My master thesis at D-CHAB (ETH Zürich) - Building a 25MHz NMR spectrometer
24 parts11GPL-3.0 - 2 layers142.1 × 90.8 mm
- 2 layers150 × 79.8 mm
- 2 layers100 × 100 mm
