

ArcheSword
- Size
- 52 × 49 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 69
- Pads
- 298
- Tracks, vias
- 1,644, 196
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210606)
- Created
- 3 Jul 2021
- Updated
- 8 Aug 2021
Overview
ArcheSword is an open-source printed circuit board by Kreyl, from the Kreyl/Archeology repository on GitHub. It is a 2-layer board of 52 × 49 mm with 72 parts on 69 nets, routed with 1,644 tracks and 196 vias.
It is built around the CC1101RGP, IRLML6401 and BLM15AG102SN1. Its parts include 24 capacitors, 13 resistors, 13 transistors, 2 inductors and 1 switch. It belongs with the STM32 boards of this library.
Main components
3CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICsIRLML6401
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 125pF 12V 15nC@5V 180pF 4.3A 830pF 85mΩ@1.8V 950mV P-Channel SOT-23 MOSFETs ROHSKEXINMOSFETsBLM15AG102SN1
04021 1kΩ@100MHz 300mA 650mΩ ±25% 0402 Ferrite Beads ROHSMurataFerrite Beads
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1u | Capacitors:CAP_0603_Silks | C1, C6, C8, C9, C10, C11, C12, C13, C16, C18, C22, C24 |
| 10 | LED_5050 | LEDs:LED_5050 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10 |
| 5 | 100k | Resistors:RES_0603 | R7, R8, R12, R14, R15 |
| 5 | 10u | Capacitors:CAP_0603_Silks | C15, C17, C21, C23, C25 |
| 4 | HOLE_METALLED | PCB:Hole3_5_out6mm | HOLE1, HOLE2, HOLE3, HOLE4 |
| 3 | 1u | Capacitors:CAP_0603_Silks | C7, C19, C20 |
| 2 | * | Capacitors:CAP_0402 | C2, C3 |
| 2 | 10k | Resistors:RES_0603 | R2, R11 |
| 2 | 18pF | Capacitors:CAP_0603_Silks | C4, C5 |
| 2 | 3k | Resistors:RES_0603 | R9, R10 |
| 2 | 4k7 | Resistors:RES_0603 | R5, R6 |
| 2 | 56k | Resistors:RES_0603 | R1, R3 |
| 2 | ICN2595 | SO_DIL_TSSOP:TSSOP24_150_0635 | DD4, DD5 |
| 2 | IRLML6401 | SOT:SOT23-3 | Q11, Q13 |
| 1 | * | Inductors:IND_0402 | L1 |
| 1 | 27MHz | Quartz:03225C4 | XTAL1 |
| 1 | 2N7002 | SOT:SOT23-3 | Q14 |
| 1 | ANT_GENERAL | Antennas:Locket5 | ANT1 |
| 1 | BALUN868JOHANSON | Radio:BALUN_JOHANSON868 | BLN1 |
| 1 | BLM15AG102SN1 | Inductors:IND_0402 | L2 |
| 1 | BUTTON | BtnsSwitches:BTN_4x4_SMD | SW1 |
| 1 | CC1101 | QFN_DFN:QFN20 | DD1 |
| 1 | CONN_1 | Connectors:PLS-1Square | XL4 |
| 1 | CONN_2 | Connectors:SLD_2_2D5 | XL3 |
| 1 | CONN_6 | Connectors:PLS-6_LOCK | XL1 |
| 1 | LIS3 | LGA:LGA16_3X3_5_3 | DD3 |
| 1 | Logo | Pictures:Ostranna_16d9_13d5 | Logo1 |
| 1 | MCP1700 | SOT:SOT23-3A | DA1 |
| 1 | PLS1 | Connectors:PLS-1Rnd | XL2 |
| 1 | STM32G070KxTx | LQFP_TQFP:TQFP-32_7x7_Pitch0.8mm | DD2 |
| 1 | TESTPOINT | PCB:TESTPOINT_1MM | TP1 |
Similar boards
- 2 layers40 × 85.5 mm

- 4 layers310.5 × 21.4 mm

- 4 layers60.8 × 64.8 mm

- 2 layers46 × 103 mm

- 2 layers30 × 103 mm

- 4 layers53.2 × 138.8 mm

- 4 layers259.1 × 13.5 mm

- 2 layers48 × 85 mm

Questions
How big is the ArcheSword PCB?
It measures 52 × 49 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ArcheSword use?
72 parts, built around the CC1101RGP, IRLML6401 and BLM15AG102SN1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ArcheSword KiCad files?
From the Kreyl/Archeology repository on GitHub, at the commit this page was made from: the board is ArcheSword_hw/ArcheSword.kicad_pcb and its schematic ArcheSword_hw/ArcheSword.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ArcheSword design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.