
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

laba_stria1
Vortex v8 доработка is an open-source printed circuit board by Kredos9107, from the Kredos9107/zxc repository on GitHub. It is a 2-layer board of 139 × 101 mm with 16 parts on 34 nets, routed with 116 tracks and 0 vias.
Its parts include 5 connectors, 3 ICs, 1 capacitor, 1 resistor and 1 diode. It belongs with the ESP32 boards of this library.
1 2 3 4 5 6 изменяю файл в ветке 2 для последующего слияния
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | H1, H2, H3, H4 | ||
| 1 | ESP32 — плата управления | Vortex:ESP32_30P_SOCKET_PRELIM | U1 |
| 1 | HW-517 — управление насосом | Vortex:HW517_FULL_SOCKET_PRELIM | U3 |
| 1 | XL4015 — питание 5 В | Vortex:XL4015_SOCKET_20x50_PRELIM | U2 |
| 1 | Вход 12 В — пайка проводов | Vortex:12V_INPUT_SOLDER | J1 |
| 1 | Джампер VIN — снять перед USB | Vortex:VIN_POWER_JUMPER | JP1 |
| 1 | Диод 1N5819 | Vortex:1N5819 | D1 |
| 1 | Конденсатор 1000 мкФ 25 В | Vortex:1000uF_25V | C1 |
| 1 | Насос — пайка проводов | Vortex:PUMP_SOLDER | J2 |
| 1 | Подсветка — провода | Vortex:WS2811_SOLDER | J3 |
| 1 | Провода энкодера насоса | Vortex:ENC1_HEADER_V7 | J5 |
| 1 | Провода энкодера света | Vortex:ENC2_HEADER_V7 | J6 |
| 1 | Резистор 330 Ом | Vortex:330R | R1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 139 × 101 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Kredos9107/zxc repository on GitHub, at the commit this page was made from: the board is ПЦП/Vortex_v8_доработка/Vortex_v8_доработка.kicad_pcb and its schematic ПЦП/Vortex_v8_доработка/Vortex_v8_доработка.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Kredos9107 before reusing the design.