Skip to the content
4 layers191 × 113 mmJhl synth3, the printed circuit board in 3D
Size
191 × 113 mm
Copper layers
4
Thickness
1.6 mm
Parts
128
Nets
103
Pads
435
Tracks, vias
915, 79
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
29 Apr 2026
Updated
21 May 2026

Overview

Jhl synth3 is an open-source printed circuit board by koyoi, from the koyoi/jhl_synth3_pcb repository on GitHub. It is a 4-layer board of 191 × 113 mm with 128 parts on 103 nets, routed with 915 tracks and 79 vias.

It is built around the TLP127. Its parts include 41 switches, 38 diodes, 8 capacitors, 3 ICs and 3 connectors.

Main components

1

Parts

128
QtyValueFootprintReferences
36D_Small_FilledDiode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolderD100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113, D114, D115 +20
36SW_PushButton_Switch_SMD:SW_SPST_TL3342SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +20
80.1uCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC4, C5, C6, C7, C8, C9, C10, C11
8R_Potentiometer_USPotentiometer_THT:Potentiometer_Vishay_T73YP_VerticalRV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9
5SW_PushButton_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mmSW1, SW2, SW3, SW4, SW5
22kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR10, R11
2LED_Small_FilledLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD97, D98
1Conn_I2SConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ3
1Conn_LCDConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ5
1DIN-5Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ4
1NPN 2N3904 SOT-23Package_TO_SOT_SMD:TSOT-23_HandSolderingQ1
1NPN 2SC4116 SC-70Package_TO_SOT_SMD:SOT-323_SC-70Q2
1TLP127Package_SO:Toshiba_SOIC-4-6_4.4x3.6mm_P1.27mmU2
1YAAJ_WeAct_BlackPill_Part_Likelocallib:YAAJ_WeAct_BlackPill_SWD_2U1
1~Package_DIP:DIP-24_W15.24mm_LongPadsU3

The 105 most common of 128 parts.

Similar boards

  • 2 layers108 × 110 mmBms active hw, the printed circuit board in 3D

    Bms active hw

    NGOQUOC98/ESP32_PCB

    136 parts1
  • 4 layers110 × 90 mmPLC V1, the printed circuit board in 3D

    PLC V1

    paulmartinezcuenta/UltiCore-V1-PLC

    Custom industrial-grade PLC and logic controller engineered around the ESP32 platform.

    202 parts1MIT
  • 4 layers90 × 61.5 mmPM Controller, the printed circuit board in 3D

    PM Controller

    ZeshuLiu/PolaMiyaHardware

    132 parts1
  • 2 layers156.5 × 120 mmControladora Semaforos, the printed circuit board in 3D

    Controladora Semaforos

    dieleoz/Controladora_Semaforos-2

    La tabla de abajo es verdad. Lee lo que mide antes de lo que puntúa.

    185 parts
  • 2 layersPLC V1, the printed circuit board in 3D

    PLC V1

    JosueHerrera05/Josue_Herrera_Electiva_2026_C2

    Repositorio Electíva Diseño Mecatrónico 2026-C2

    59 partsMIT
  • 4 layers71.1 × 89.6 mmModule 16S, the printed circuit board in 3D

    Module 16S

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    128 parts1.1k
  • 4 layers85.6 × 53.8 mmMuVox, the printed circuit board in 3D

    MuVox

    muvox-io/muVox

    Open Source Hardware Audio Amplifier

    128 parts84
  • 4 layers125.7 × 76.5 mmUGC Main, the printed circuit board in 3D

    UGC Main

    HandHeldLegend/GC-Ultimate

    The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .

    128 parts62

Questions

How big is the Jhl synth3 PCB?

It measures 191 × 113 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Jhl synth3 use?

128 parts, built around the TLP127. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Jhl synth3 KiCad files?

From the koyoi/jhl_synth3_pcb repository on GitHub, at the commit this page was made from: the board is jhl_synth3.kicad_pcb and its schematic UIs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Jhl synth3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask koyoi before reusing the design.