Skip to the content
2 layers66.7 × 82 mmStreamerPad, the printed circuit board in 3D

I am making a macropad under Hack Club. My goal with this macropad is to allow for dedicated macros for streaming and editing alonside a screen that states which OBS I am on.

Size
66.7 × 82 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
23
Pads
81
Tracks, vias
66, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
11 Jul 2026
Updated
3 Nov 2026

Overview

StreamerPad is an open-source printed circuit board by koya-san, from the koya-san/MediaPad repository on GitHub. It is a 2-layer board of 66.7 × 82 mm with 21 parts on 23 nets, routed with 66 tracks and 0 vias.

Its parts include 9 diodes, 9 switches and 2 ICs. It belongs with the keyboards and input boards of this library.

README

README.md

MediaPad

I am making a macropad under Hack Club. My goal with this macropad is to allow for dedicated macros for streaming and editing alongside a screen that states which OBS I am on. The macropad is a 3x3 that used MX-style switches and a 128x32 OLED screen. Side note, some files are named StreamerPad, the old name I gave for this project that I would sometimes mix up with MediaPad :P

MediaPad Screenshot 2026-08-23 181154

Schematic Screenshot 2026-08-23 181212

PCB Screenshot 2026-08-23 181235

Case Screenshot 2026-08-23 181412

My case will case will come together with 4 screws. BOM: Seeed XIAO RP2040, 9x 1N4148 Diodes, 9x MX-Style switches, 1x 0.91 inch OLED display, 9x white blank DSA keycaps, 4x M3x16mm screws, 4x M3x5mx4mm heatset inserts

Parts

21
QtyValueFootprintReferences
9~ScottoKeebs_Components:Diode_DO-35D1, D2, D3, D4, D5, D6, D7, D8, D9
9~ScottoKeebs_MX:MX_PCB_1.00uS1, S2, S3, S4, S5, S6, S7, S8, S9
1ER_OLEDM0.91_1x-I2CDisplay:ER_OLEDM0.91_1x-I2CU2
1LOGOFERN:fern2G***
1MOUDLE-SEEEDUINO-XIAOfootprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MMU1

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the StreamerPad PCB?

It measures 66.7 × 82 mm and has 2 copper layers, 1.6 mm thick.

What parts does the StreamerPad use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the StreamerPad KiCad files?

From the koya-san/MediaPad repository on GitHub, at the commit this page was made from: the board is StreamerPad.kicad_pcb and its schematic PCB/StreamerPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the StreamerPad design in my own project?

Its repository states no licence, so its author keeps all rights: ask koya-san before reusing the design.