Skip to the content
2 layers221 × 71.1 mmNixie board, the printed circuit board in 3D

Modular nixie + VFD display: ATmega328P firmware, Raspberry Pi control software and KiCad hardware in one repo

Size
221 × 71.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
71
Nets
85
Pads
272
Tracks, vias
622, 125
Pours
506
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Sep 2026
Updated
6 Sep 2026

Overview

Nixie board is an open-source printed circuit board by kotbehemot53, from the kotbehemot53/universal-nixie-display repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 221 × 71.1 mm with 71 parts on 85 nets, routed with 622 tracks and 125 vias.

It is built around the ATMEGA328-PU and SFH619A. Its parts include 13 connectors, 12 resistors, 12 ICs, 4 capacitors and 1 diode. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Universal Nixie Display

This is the central project for the open source software and hardware for the Universal Nixie Display. The display is something more than a desktop nixie clock - it can be whatever you want it to be by displaying not only time but also weather data or any data you want it to display.

At the moment it is a work in progress.

Physical Components

The display is modular. Each board works on its own (or with a different master), the default configuration is:

  • Nixie board (top): up to 6 nixie tubes (attached via pluggable socket boards with current-limiting trimmers, so various nixie models can be used) + up to 2 neon lamps. Driven by an ATmega328P that receives commands over I²C (address 0x4).
  • VFD board (bottom): one IV-18 8-digit 7-segment VFD tube. Driven by an ATmega328P that receives commands over I²C (address 0x5).
  • Pi hat: sits on a Raspberry Pi, sends commands to the boards above, takes power from an external supply and distributes it, and exposes connectors for control buttons / knobs and the power button.
  • Socket boards: small per-tube-model boards (IN-14, Z573M) and a neon lamp board that plug into the nixie board.

Operating principles

The microcontrollers provide low-level control over the displays - multiplexing, dimming, displaying letters or digits, simple animations. The Raspberry communicates with them using I²C and sends simple commands (what characters to display, at what brightness etc.). There are python scripts on the Raspberry that can obtain various data (e.g. weather data from Ruuvi sensors, time from an RTC, whatever else the user wants) and pass it to be displayed on the nixies and VFD using provided python libraries that wrap the microcontroller commands in an easy-to-use API.

By default the nixies are meant to be used as the "main" display, whereas the VFD is a "secondary" display, used to show currently chosen options etc. But it's up to the user to decide how they want to use them.

Repository layout

text
firmware/
  nixie-controller/   PlatformIO project, ATmega328P firmware for the nixie board
  vfd-controller/     PlatformIO project, ATmega328P firmware for the VFD board
software/
  raspberry/          Python scripts + systemd units for the Raspberry Pi master
hardware/
  nixie-board/        KiCad project of the nixie board
  vfd-board/          KiCad project of the VFD board
  pi-hat/             KiCad project of the Raspberry Pi hat
  sockets/            KiCad projects of the tube socket boards (in14, z573m, neon)
  lib/                Shared KiCad symbol / footprint / 3D libraries used by the boards above
scratch/
  kicad-experiments/  Throwaway KiCad experiments, not part of the product

See hardware/README.md for the board naming history, PCB variants and fabrication files.

Each firmware directory is a self-contained PlatformIO project - open it directly in PlatformIO / your IDE. Everything in this repository is licensed under the GPLv3 (see LICENSE).

History

This repository was assembled from several previous ones (the firmware and Raspberry code used to live in separate repos pulled in as git submodules, the hardware lived in an older private repo). Their git histories were rewritten into subdirectories and merged here, so git log --follow works on the imported files. Old feature branches were kept under the nixie-controller/, vfd-controller/ and raspberry/ branch prefixes, VFD firmware releases are tagged vfd-controller/<version>.

Parts

71
QtyValueFootprintReferences
11330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12
610kPotentiometer_THT:Potentiometer_Bourns_3386F_VerticalRV3, RV4, RV5, RV6, RV7, RV8
6SFH619ASamacSys_Parts:DIP762W56P254L469H470Q4NU7, U8, U9, U10, U11, U12
4200kPotentiometer_THT:Potentiometer_Bourns_3386F_VerticalRV1, RV2, RV9, RV10
20.1uFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC3, C4
222pFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1, C2
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
116MhzCrystal:Crystal_HC49-4H_VerticalX1
1ATmega328-PPackage_DIP:DIP-28_W7.62mmU1
1BOOST C HVConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ5
1BOOST C LVConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ4
1G***kibuzzard-629EA4E7kibuzzard-629EA4E7
1G***kibuzzard-6293E830kibuzzard-6293E830
1G***kibuzzard-6293E725kibuzzard-6293E725
1I2C DATAConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ3
1K155NA1Package_DIP:DIP-16_W7.62mmU2
1L COMMA OPTCPLRSamacSys_Parts:DIP762W56P254L469H470Q4NU3
1L0Nixiecock1:IDC-Header_2x07_P2.54mm_Vertical_alt_pinsJ8
1L1Nixiecock1:IDC-Header_2x07_P2.54mm_Vertical_alt_pinsJ9
1L2Nixiecock1:IDC-Header_2x07_P2.54mm_Vertical_alt_pinsJ10
1L3Nixiecock1:IDC-Header_2x07_P2.54mm_Vertical_alt_pinsJ11
1L4Nixiecock1:IDC-Header_2x07_P2.54mm_Vertical_alt_pinsJ12
1L5Nixiecock1:IDC-Header_2x07_P2.54mm_Vertical_alt_pinsJ13
1N0 NEON SWITCHSamacSys_Parts:DIP762W56P254L469H470Q4NU5
1N1 NEON SWITCHSamacSys_Parts:DIP762W56P254L469H470Q4NU6
1NEON N0Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ6
1NEON N1Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ7
1PWRConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ2
1R COMMA OPTCPLRSamacSys_Parts:DIP762W56P254L469H470Q4NU4
1RESETButton_Switch_THT:SW_TH_Tactile_Omron_B3F-10xxSW1
1STATUSLED_THT:LED_D3.0mmD1
1Symbol_HighVoltage_Type2_CopperTop_VerySmallSymbol:Symbol_HighVoltage_Type2_CopperTop_VerySmallSYM_HV
1UARTConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1

The 58 most common of 71 parts.

More from kotbehemot53/universal-nixie-display

9
  • 2 layers221 × 71.1 mmNixie board prefill2, the printed circuit board in 3D

    Nixie board prefill2

    kotbehemot53/universal-nixie-display

    Modular nixie + VFD display: ATmega328P firmware, Raspberry Pi control software and KiCad hardware in one repo

    66 partsGPL-3.0
  • 2 layers221 × 71.1 mmVfd board, the printed circuit board in 3D

    Vfd board

    kotbehemot53/universal-nixie-display

    Modular nixie + VFD display: ATmega328P firmware, Raspberry Pi control software and KiCad hardware in one repo

    43 partsGPL-3.0
  • 2 layers221 × 71.1 mmVfd board prefill1, the printed circuit board in 3D

    Vfd board prefill1

    kotbehemot53/universal-nixie-display

    Modular nixie + VFD display: ATmega328P firmware, Raspberry Pi control software and KiCad hardware in one repo

    38 partsGPL-3.0
  • 2 layers70.6 × 36.6 mmPi hat, the printed circuit board in 3D

    Pi hat

    kotbehemot53/universal-nixie-display

    Modular nixie + VFD display: ATmega328P firmware, Raspberry Pi control software and KiCad hardware in one repo

    36 partsGPL-3.0
  • 2 layers70.6 × 36.6 mmPi hat unrounded, the printed circuit board in 3D

    Pi hat unrounded

    kotbehemot53/universal-nixie-display

    Modular nixie + VFD display: ATmega328P firmware, Raspberry Pi control software and KiCad hardware in one repo

    33 partsGPL-3.0
  • 2 layersPi hat tht, the printed circuit board in 3D

    Pi hat tht

    kotbehemot53/universal-nixie-display

    Modular nixie + VFD display: ATmega328P firmware, Raspberry Pi control software and KiCad hardware in one repo

    32 partsGPL-3.0
  • 2 layers20 × 40.2 mmIn14board, the printed circuit board in 3D

    In14board

    kotbehemot53/universal-nixie-display

    Modular nixie + VFD display: ATmega328P firmware, Raspberry Pi control software and KiCad hardware in one repo

    5 partsGPL-3.0
  • 2 layers20 × 40.2 mmNeonBoard prefill1, the printed circuit board in 3D

    NeonBoard prefill1

    kotbehemot53/universal-nixie-display

    Modular nixie + VFD display: ATmega328P firmware, Raspberry Pi control software and KiCad hardware in one repo

    5 partsGPL-3.0
  • 2 layers20 × 40.2 mmZ573mBoard, the printed circuit board in 3D

    Z573mBoard

    kotbehemot53/universal-nixie-display

    Modular nixie + VFD display: ATmega328P firmware, Raspberry Pi control software and KiCad hardware in one repo

    5 partsGPL-3.0

Similar boards

  • 2 layers104.9 × 75.2 mmHandipi kb, the printed circuit board in 3D

    Handipi kb

    brickbots/HandiPi

    Handheld RPI4 based computer with keyboard and display

    95 parts814MIT
  • 2 layers228 × 98 mmPlaid, the printed circuit board in 3D

    Plaid

    hsgw/plaid

    12x4 ortholinear usb keyboard made by Through Hole components ONLY.

    139 parts779MIT
  • 2 layers94.6 × 46.1 mmHeaterMeterPI, the printed circuit board in 3D

    HeaterMeterPI

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    66 parts557MIT
  • 2 layers50 × 50 mmAvrcraft poed, the printed circuit board in 3D

    Avrcraft poed

    cnlohr/avrcraft

    Minecraft server optimized for 8-bit devices.

    58 parts471
  • 2 layers284.7 × 94.2 mmLumberjack, the printed circuit board in 3D

    Lumberjack

    peej/lumberjack-keyboard

    5x12 ortholinear through-hole component keyboard PCB for standard 60% cases

    165 parts403MIT
  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers63.3 × 57.2 mmRam Tester, the printed circuit board in 3D

    Ram Tester

    tops4u/Ram-Tester

    Ram Tester for vintage CBM Computer RAM Chips

    42 parts118
  • 2 layers285 × 117 mmTartan, the printed circuit board in 3D

    Tartan

    hsgw/tartan

    60% keyboard made by through-hole parts only

    171 parts98

Questions

How big is the Nixie board PCB?

It measures 221 × 71.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Nixie board use?

71 parts, built around the ATMEGA328-PU and SFH619A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Nixie board KiCad files?

From the kotbehemot53/universal-nixie-display repository on GitHub, at the commit this page was made from: the board is hardware/nixie-board/nixie-board.kicad_pcb and its schematic hardware/nixie-board/nixie-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Nixie board design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).