2 layers78 × 90 mm
2 layers78 × 90 mm
Hcu
koson/hcuUsewood Hydraulic Control Unit
- Size
- 78 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 123
- Nets
- 103
- Pads
- 473
- Tracks, vias
- 1,304, 205
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Oct 2021
- Updated
- 2 Jul 2021
Overview
Hcu is an open-source printed circuit board by koson, from the koson/hcu repository on GitHub. It is a 2-layer board of 78 × 90 mm with 123 parts on 103 nets, routed with 1,304 tracks and 205 vias.
It is built around the LPC1549JBD64, VND5050AJTR-E and VN5E010AH-E, with the T491D226K035AT among its other parts. Its parts include 38 resistors, 36 diodes, 24 capacitors, 13 ICs and 3 connectors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
4
LPC1549JBD64
LQFP-64(10x10)Microcontrollers (MCU/MPU/SOC)NXP Semiconductors
VND5050AJTR-E
PowerSSO-12-40℃~+150℃ 12A 2 4.5V~36V 50mΩ Active High High Side Switch Overvoltage protection、Under-voltage lockout、Reverse voltage protection、Overcurrent Protection、Over temperature protection、Short-Circuit Protection PowerSSO-12 Power Distribution Switches ROHSSTMicroelectronicsPower Distribution Switches
VN5E010AH-E
HPAK-6-40℃~+150℃ 1 10mΩ 4.5V~28V Active High High Side Switch HPAK-6 Power Distribution Switches ROHSSTMicroelectronicsPower Distribution Switches
T491D226K035AT
CASE-D-7343-31(mm)-55℃~+125℃ 22uF 35V 700mΩ@100kHz ±10% CASE-D-7343-31(mm) Tantalum Capacitors ROHSKEMETTantalum Capacitors
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 1K | yageo:0603 | R203, R301, R302, R303, R401, R402, R1001, R1002, R1003, R1101, R1102, R1103, R1201, R1202, R1403, R1404 +16 |
| 23 | DIODE_RS07J-GS18 | usevolt:DO219AB | D302, D303, D402, D403, D502, D503, D602, D1002, D1003, D1102, D1103, D1202, D1203, D1301, D1304, D1401 +7 |
| 11 | ZENER_MM3Z3V6T1G | usevolt:SOD-323 | D201, D301, D401, D501, D601, D701, D801, D901, D1001, D1101, D1402 |
| 10 | 4.7uF | kemet:0603 | C301, C401, C501, C601, C701, C801, C901, C1001, C1101, C1201 |
| 10 | VND5050AJTR-E | usevolt:PowerSSO-12 | U301, U401, U501, U601, U701, U801, U901, U1001, U1101, U1201 |
| 9 | 100nF | kemet:0603 | C201, C202, C203, C204, C205, C206, C207, C1301, C1305 |
| 4 | 10K | yageo:0603 | R201, R202, R1402, R1405 |
| 2 | 18pF | kemet:0603 | C208, C209 |
| 2 | FUSE_MC36211_350MA | usevolt:FUSE_MC36211 | F1301, F1401 |
| 1 | 10nF | kemet:0603 | C1303 |
| 1 | 120 | yageo:0603 | R1 |
| 1 | AMPSEAL_23_POS_VERT_BLACK_SEALED_1-776228-1 | usevolt:AMPSEAL_23_POS_776200-1 | J101 |
| 1 | AMPSEAL_8_POS_VERT_WHITE_SEALED_1-776276-2 | usevolt:AMPSEAL_8_POS_776275-1 | J102 |
| 1 | ARM_JTAG_SWD_HEADER_10_PINSMD | usevolt:ARM_10_PIN_JTAG_SWD_CONNECTOR | J201 |
| 1 | CAP_EEE-FK1H470P | usevolt:CAP_EEE-FK1H470P | C1302 |
| 1 | DIODE_TVS_SMBJ33A-TRDO-214AA | usevolt:DO-214AA | D1302 |
| 1 | DIODE_TVS_TPSMD28A | usevolt:DO-214AB | D1303 |
| 1 | IND_744045210 | usevolt:IND_744045210 | L1301 |
| 1 | LM2671SOIC8 | usevolt:SOIC8 | VR1301 |
| 1 | LOGO | usevolt:uv_logo | G*** |
| 1 | LOGO | usevolt:uw_logo | G*** |
| 1 | LPC1549JBD64 | usevolt:QFP64 | U202 |
| 1 | MCP2551_SOIC8 | usevolt:SOIC8 | U201 |
| 1 | REG_MCP1700 | usevolt:SOT-23_3-PIN | VR1302 |
| 1 | R_75OHM | usevolt:1206 | R1401 |
| 1 | T491D226K035AT | kemet:7343 | C1304 |
| 1 | VN5E010AH | usevolt:HPAK | U1401 |
| 1 | XTAL_7A-12.000MAAJ-T | usevolt:XTAL_7A-20.000MAJ | X201 |
The 122 most common of 123 parts.
Questions
How big is the Hcu PCB?
It measures 78 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hcu use?
123 parts, built around the LPC1549JBD64, VND5050AJTR-E, VN5E010AH-E and T491D226K035AT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hcu KiCad files?
From the koson/hcu repository on GitHub, at the commit this page was made from: the board is hw/hcu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hcu design in my own project?
Its repository states no licence, so its author keeps all rights: ask koson before reusing the design.
Similar boards
- 2 layers87.3 × 60.3 mm
- 2 layers150 × 70 mm
- 2 layers30 × 30 mm
ReCamera Gimbal
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
123 parts495Apache-2.0 - 2 layers231.8 × 158.1 mm
8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
123 parts326 - 2 layers100 × 100 mm
- 2 layers89 × 55.5 mm
Mintypcb
jackw01/pi-tin
Open source raspberry pi handheld retro gaming console
123 parts75CERN-OHL-W-2.0 - 2 layers97.5 × 97.5 mm
Ud29
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
123 parts59