2 layers95.3 × 95.3 mm
2 layers106 × 65 mm
Bldc drive
koson/BLDC-1BLDC motor control
- Size
- 106 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 117
- Nets
- 81
- Pads
- 357
- Tracks, vias
- 1,380, 95
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 May 2022
- Updated
- 13 Sep 2020
Overview
Bldc drive is an open-source printed circuit board by koson, from the koson/BLDC-1 repository on GitHub. It is a 2-layer board of 106 × 65 mm with 117 parts on 81 nets, routed with 1,380 tracks and 95 vias.
It is built around the MAX481EPA+, TJA1051T and IR2101PBF, with the 24LC08B/P, IRF1407 and 1N4148WS among its other parts. Its parts include 49 resistors, 20 capacitors, 13 ICs, 11 diodes and 9 transistors. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
9
MAX481EPA+
PDIP-8-40℃~+85℃ 1 1 2.5Mbps 4.75V~5.25V Transceiver ±15kV PDIP-8 RS-485 / RS-422 ICs ROHSMaxim Integrated (Analog Devices)RS-485 / RS-422 ICs
TJA1051T
SOIC-8-40℃~+150℃ 2.5mA 4.5V~5.5V 5Mbps 70mA CAN Transceiver SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversIR2101PBF
PDIP-8-40℃~+125℃ 100ns 10V~20V 130mA 150ns 150uA 160ns 2 270mA 50ns Half-Bridge IGBT、MOSFET Under Voltage Protection PDIP-8 Gate Drivers ROHSInfineon TechnologiesGate Drivers24LC08B/P
PDIP-8-40℃~+125℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 5ms 8Kbit Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROM
IRF1407
TO-220MOSFETsMinos
1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
BC807
SOT-23-65℃~+150℃ 1 PNP 100 100nA 345mW 45V 500mA 5V 700mV 80MHz PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
Parts
117| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1k | Resistor_SMD:R_0805_2012Metric | R21, R22, R27, R28, R29, R33, R34 |
| 7 | IRF1407 | Package_TO_SOT_THT:TO-220-3_Vertical | Q3, Q4, Q5, Q6, Q7, Q8, Q9 |
| 6 | 4R7 | Resistor_SMD:R_0805_2012Metric | R19, R20, R24, R25, R31, R32 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R16 |
| 5 | 1N4148WS | Diode_SMD:D_SOD-123 | D1, D3, D4, D5, D6 |
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6 |
| 5 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, R7, R8, R9 |
| 3 | 0R* | Resistor_SMD:R_0603_1608Metric | R43, R48, R49 |
| 3 | 0R** | Resistor_SMD:R_0603_1608Metric | R41, R44, R46 |
| 3 | 10 uF 35V | Capacitor_SMD:C_1206_3216Metric | C9, C10, C11 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R17, R18, R23 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C8, C12, C13 |
| 3 | 56R | Resistor_SMD:R_0603_1608Metric | R10, R12, R14 |
| 3 | 56R* | Resistor_SMD:R_0603_1608Metric | R11, R13, R15 |
| 3 | 56R** | Resistor_SMD:R_0603_1608Metric | R42, R45, R47 |
| 3 | A1302KUA-T | Package_TO_SOT_THT:TO-92_Wide | U3, U4, U5 |
| 3 | DZ2S033X0L | Diode_SMD:D_SOD-523 | D2, D7, D8 |
| 3 | IR2101 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6, U7, U8 |
| 3 | MountingHole_Pad | user_pads:MountingHole_6x2 | H1, H2, H3 |
| 2 | 120R | Resistor_SMD:R_1206_3216Metric | R35, R36 |
| 2 | 1N4148W | Diode_SMD:D_SOD-123 | D9, D10 |
| 2 | 1u | Capacitor_SMD:C_1206_3216Metric | C14, C18 |
| 2 | 2200uf | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C16, C17 |
| 2 | 2k2 | Resistor_SMD:R_0603_1608Metric | R38, R40 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R37, R39 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric | C19, C20 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J4 |
| 2 | INDUCTOR | Inductor_THT:L_Axial_L16.0mm_D6.3mm_P20.32mm_Horizontal_Fastron_VHBCC | L1, L2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.5mm_Pad_Via | H4, H5 |
| 1 | 0R05 | Resistor_SMD:R_4020_10251Metric_Pad1.65x5.30mm_HandSolder | R30 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 24LC08 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | 2u2 | Capacitor_SMD:C_1206_3216Metric | C15 |
| 1 | 47 uF 35V | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 560R | Resistor_SMD:R_0805_2012Metric | R26 |
| 1 | AP1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U13 |
| 1 | BC807 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x04_Male | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Vertical | J1 |
| 1 | Conn_01x04_Male | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J2 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Crystal_GND2_Small | Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | D_Zener | Diode_SMD:D_SMB | D11 |
| 1 | INA193 | Package_TO_SOT_SMD:SOT-23-5 | U9 |
| 1 | MAX481E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U11 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_Pad_Via | H6 |
| 1 | STM32F042C6Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | TJA1051T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | uA7812 | Package_TO_SOT_THT:TO-220-3_Vertical | U12 |
The 116 most common of 117 parts.
Questions
How big is the Bldc drive PCB?
It measures 106 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bldc drive use?
117 parts, built around the MAX481EPA+, TJA1051T, IR2101PBF and 24LC08B/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bldc drive KiCad files?
From the koson/BLDC-1 repository on GitHub, at the commit this page was made from: the board is shematic/bldc_drive/bldc_drive.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bldc drive design in my own project?
Its repository states no licence, so its author keeps all rights: ask koson before reusing the design.
Similar boards
- 2 layers100 × 99.4 mm
ThorDriveInverter ProtoV0
Omar-Magdy0/Proto_V0
The controller board enables BLDC motor control using ATmega328P and supports BEMF zero-crossing sensorless operation.
149 parts - 2 layers99.5 × 98.9 mm
- 2 layers114.3 × 40.6 mm
KSGER Controller REV 2.0
omega9380/KSGER-Coverplates
T12 Soldering Iron control board. A design based on schematics created by Mindstorm88 on the EEVBlog forums.
54 parts5 - 2 layers89.6 × 79 mm
TDR 5351 core
MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.
199 parts33GPL-3.0 - 4 layers101.6 × 147.3 mm
- 2 layers64.5 × 39.9 mm
- 2 layers78.3 × 80.5 mm
Mesa mezclas
mariomp14/mixing_table
This desing has some errors! If you want do the the project you have to change some things. During the explain the errors will be pointed out and explained.
87 parts