
Ovio core
korken89/ovio_core
Work in progress. PCB have arrived for v1.0 of the board and bring-up has started.

Ether is an open-source printed circuit board by korken89, from the korken89/ether repository on GitHub. It is a 6-layer board of 200 × 134 mm with 210 parts on 889 nets, routed with 372 tracks and 76 vias.
It is built around the TPS62290DRV, FT600Q-B-T and W25Q128JVPIQ, with the TXB0108DQSR, PUSB3FR4Z and USBLC6-2P6 among its other parts. Its parts include 98 capacitors, 44 resistors, 42 ICs, 7 connectors and 4 inductors. It belongs with the FPGA and CPLD boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 83 | 0.1u | passive:C_0201 | C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113, C114, C117, C118 +67 |
| 32 | TXB0108DQSR | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U301, U303, U305, U307, U309, U310, U311, U312, U401, U403, U405, U407, U409, U410, U411, U412 +16 |
| 24 | 33 | passive:R_0201 | R105, R106, R107, R108, R109, R110, R111, R112, R113, R114, R115, R116, R117, R118, R119, R120 +8 |
| 8 | ~ | passive:R_0201 | R201, R202, R203, R204, R205, R206, R207, R208 |
| 7 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H101, H102, H103, H104, H105, H106, H107 |
| 5 | 10k | passive:R_0201 | R102, R103, R104, R133, R136 |
| 5 | 1k | passive:R_0201 | R129, R130, R131, R132, R134 |
| 5 | 4.7u | passive:C_0603 | C121, C201, C202, C203, C204 |
| 4 | 10061913-102PLF | connectors:AMPHENOL_10061913-102PLF | J301, J401, J501, J601 |
| 4 | 2.2u | Inductor_SMD:L_Abracon_ASPI-3012S | L201, L202, L203, L204 |
| 4 | 22p | passive:C_0201 | C206, C207, C208, C209 |
| 4 | 22u | passive:C_0603 | C211, C212, C213, C214 |
| 4 | TPS62290 | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U201, U202, U203, U204 |
| 2 | 10p | passive:C_0402 | C115, C116 |
| 1 | 0 | passive:R_0201 | R135 |
| 1 | 1.6k | passive:R_0201 | R101 |
| 1 | 30 MHz | crystals:Crystal_4Pin_2.0x1.6mm | Y101 |
| 1 | ECP5U_85_CABGA756 | Package_BGA:Lattice_caBGA-756_27.0x27.0mm_Layout32x32_P0.8mm | U101 |
| 1 | FT600Q | qfn:QFN-56-1EP_7x7mm_P0.4mm_EP5.7x5.7mm_FT600 | U103 |
| 1 | FerriteBead_Small | passive:R_0603 | FB101 |
| 1 | GSB422137EU | connectors:AMPHENOL_GSB422137EU | J102 |
| 1 | LED_Small | LED_SMD:LED_0402_1005Metric | D101 |
| 1 | PUSB3FR4Z | dfn:DFN-10-1.0x2.5mm_P0.5mm | U102 |
| 1 | SS-74500-022 | connectors:BEL_SS-74500-022 | J301 |
| 1 | TC2050 | Connector:Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical | J101 |
| 1 | TCA9535RTWR | Package_DFN_QFN:WQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm | U104 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U108 |
| 1 | W25Q128JVP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U105 |
The 205 most common of 210 parts.
It measures 200 × 134 mm and has 6 copper layers, 1.6 mm thick.
210 parts, built around the TPS62290DRV, FT600Q-B-T, W25Q128JVPIQ and TXB0108DQSR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the korken89/ether repository on GitHub, at the commit this page was made from: the board is hardware/ether.kicad_pcb and its schematic hardware/ether.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask korken89 before reusing the design.

korken89/ovio_core
Work in progress. PCB have arrived for v1.0 of the board and bring-up has started.

kbeckmann/Kilsyth
Errata: - C9 is not a GPIO on ECP5 F12 and some other variants. To get the LED working put a jumper on pin 31 and 33 on the Wide connector. - FTCLK is not routed to a clock pin.


TobiasNetzer/nanoLogger
Here is a simplified block diagram of the data logger. To measure the current of a device, the data logger is simply connected in series between the voltage source and the DUT/load.



