
EK IO AIT
Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы

После открыть файл в Inkscape и изменить размер страницы
Front is an open-source printed circuit board by Konstantin-Dudersky, from the Konstantin-Dudersky/plc-modules repository on GitHub. It is a 2-layer board of 30.5 × 99.1 mm with 3 parts on 6 nets.
Создать файл с габаритными разделами:
После открыть файл в Inkscape и изменить размер страницы
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | KiCad-Logo2_5mm_SilkScreen | Symbol:KiCad-Logo2_5mm_SilkScreen | Logo_kicad |
| 1 | PinHeader_02x04_P2.54_THT_angle | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Horizontal | J1 |
The 2 most common of 3 parts.

Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы

Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы

Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы

Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы

Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы

Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы

Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы

Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы

Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы

Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы

Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы

Konstantin-Dudersky/plc-modules
После открыть файл в Inkscape и изменить размер страницы


hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️




hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
It measures 30.5 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Konstantin-Dudersky/plc-modules repository on GitHub, at the commit this page was made from: the board is template/front/front.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Konstantin-Dudersky before reusing the design.