
BlackMagicP Konsgn
konsgn/BlackMagicProbe-v2-KiCad
A learning experience - first Kicad layout - a BlackMagicProbe v2

A learning experience - first Kicad layout - a BlackMagicProbe v2
Panel is an open-source printed circuit board by konsgn, from the konsgn/BlackMagicProbe-v2-KiCad repository on GitHub. It is a 2-layer board of 45 × 47 mm with 82 parts on 66 nets, routed with 1,436 tracks and 190 vias.
It is built around the FXLA108BQX. Its parts include 26 resistors, 14 connectors, 12 capacitors, 8 diodes and 6 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | .1uF | Capacitors_SMD:C_0603 | C2, C2, C3, C3, C4, C4, C8, C8 |
| 8 | 10k | Resistors_SMD:R_0603 | R2, R2, R8, R8, R9, R9, R10, R10 |
| 8 | 280 | Resistors_SMD:R_0603 | R3, R3, R11, R11, R12, R12, R13, R13 |
| 6 | Jtag_ARM_10pin | Homebrew:CNX_2X05X1.27_Vertical_SMD | J1, J1, J2, J2, J2, J2 |
| 4 | 22 | Resistors_SMD:R_0603 | R4, R4, R6, R6 |
| 4 | 4k7 | Resistors_SMD:R_0603 | R1, R1, R7, R7 |
| 4 | SW_Push | Homebrew:Homebrew-SMT_SPSD_5X3MM | SW1, SW1, SW2, SW2 |
| 2 | 100nF | Capacitors_SMD:C_0603 | C5, C5 |
| 2 | 1k5 | Resistors_SMD:R_0603 | R5, R5 |
| 2 | 4.7uF | Capacitors_SMD:C_0603 | C1, C1 |
| 2 | 8MHz | Homebrew:Resonator_SMD_muRata_SFSKA-3pin_7.9x3.8mm_HandSoldering | Y1, Y1 |
| 2 | AP2112_A | Homebrew:Homebrew-SOT23-5 | U1, U1 |
| 2 | Blue | LEDs:LED_0603 | D4, D4 |
| 2 | CONN_01X04 | Homebrew:Pin_Header_Angled_1x04_Pitch2.54mm_SMD_Pin1Right | J3, J3 |
| 2 | CONN_01X07 | Pin_Headers:Pin_Header_Angled_1x07_Pitch2.54mm | J4, J4 |
| 2 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm_SMD | J3, J3 |
| 2 | FXLA108 | Homebrew:Homebrew-DHVQFN20 | U2, U2 |
| 2 | Green | LEDs:LED_0603 | D1, D1 |
| 2 | Orange | LEDs:LED_0603 | D3, D3 |
| 2 | Q2-PMOS-S2G2D1S1G1D2 | Homebrew:SOT563-6 | Q1, Q1 |
| 2 | Red | LEDs:LED_0603 | D2, D2 |
| 2 | STM32F103CBTx | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U3, U3 |
| 2 | TEST | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP1, TP1 |
| 2 | USB_OTG | Homebrew:Homebrew-USB-B-MICRO-SMD_PINS | J1, J1 |
| 2 | mini | Homebrew:Homebrew-SMT_SPSD_5X3MM | SW1, SW1 |
The 78 most common of 82 parts.

konsgn/BlackMagicProbe-v2-KiCad
A learning experience - first Kicad layout - a BlackMagicProbe v2

konsgn/BlackMagicProbe-v2-KiCad
A learning experience - first Kicad layout - a BlackMagicProbe v2


TL-Embedded/Winglet-BG95
An implementation of the winglet form factor using the BG95 modem.



baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.


CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT
It measures 45 × 47 mm and has 2 copper layers, 1.6 mm thick.
82 parts, built around the FXLA108BQX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the konsgn/BlackMagicProbe-v2-KiCad repository on GitHub, at the commit this page was made from: the board is BlackMagicProbePanelized_Konsgn/Panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask konsgn before reusing the design.