

Zeal8bit rcbus
Zeal 8-bit computer to RCBus adapter
- Size
- 105 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 88
- Pads
- 162
- Tracks, vias
- 569, 55
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Aug 2025
- Updated
- 9 Aug 2025
Overview
Zeal8bit rcbus is an open-source printed circuit board by kolontsov, from the kolontsov/zeal8bit-rcbus repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 105 × 30 mm with 10 parts on 88 nets, routed with 569 tracks and 55 vias.
It is built around the 74HCT86D. Its parts include 3 connectors, 1 capacitor and 1 IC. It belongs with the retro computing and games and interfaces and adapters boards of this library.
Main components
1README
README.mdZeal 8-bit to RCBus adapter

This is a simple adapter enabling the use of RC2014 and RCBus boards with the Zeal 8-bit computer external port or backplane, with optional port mapping.
Port mapping is important because many RCBus boards use ports larger than 0x80, which is reserved I/O space on the Zeal 8-bit computer.
To make the board compatible with Zeal 8-bit, any of the A7-A4 address lines can be inverted -- see online configuration tool.
Tested with:
- SC729 – RCBus Compact Flash Module (with Zeal 8-bit OS)
- SC725 – RCBus Serial and Timer Module (with RomWBW)
- 16C2552 dual UART for RC2014 (with RomWBW)
- (to be added)
No guarantee that it will work with other RCBus boards, but it should be compatible with most of them.
Bill of Materials
| Reference | Description | Comment |
|---|---|---|
| J1 | 2x25 pin header, 2.54 mm, right angle | Plugs into Zeal 8-bit backplane |
| J2 | 2x40 or 1x40 pin socket, 2.54mm, right angle | Socket for RCBus board to plug into |
| JP1, JP2, JP3, JP4 | 2-pin header | A7-A4 invert jumpers |
| U1 | 74HCT86 (DIP-14), with optional socket | Quad 2-input XOR gate |
| C1 | 0.1µF ceramic capacitor | |
| JP5 | 2-pin header, 2.54mm | (optional) Disable Zeal 8-bit on-board ROM |
| J3 | 2-pin header, 2.54mm | (optional) RX/TX pins of RCBus |
PCB
- Gerber files are in production directory (JLCPCB, PCBWay, etc.)
- Read-to-order PCB at PCBWay
- Schematics in PDF format: zeal8bit-rcbus.pdf
- KiCad 9.0 project in this directory
Assembly
In most cases, using a 40-pin socket for connecting RCBus boards is sufficient and easier to use than an 80-pin socket, especially if you need to connect and disconnect frequently.
An 80-pin socket is only required if your RCBus board actually uses the NMI, WAIT, BUSRQ, BUSACK, HALT or A16..A21 lines.

Configuration
Use the online configuration tool to determine which address lines (A7-A4) need inversion for your specific RCBus board. Set jumpers JP1-JP4 accordingly.
License
Licensed under CERN-OHL-P v2.
All trademarks are the property of their respective owners, use of these names does not imply endorsement.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 1 | 74HCT86 | Package_DIP:DIP-14_W7.62mm_Socket | U1 |
| 1 | A4 $10 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP4 |
| 1 | A5 $20 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP3 |
| 1 | A6 $40 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | A7 $80 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | RCBus | Connector_PinSocket_2.54mm:PinSocket_2x40_P2.54mm_Horizontal | J2 |
| 1 | ROM | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP5 |
| 1 | TX/RX | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Zeal 8-bit Extension Port | Connector_PinHeader_2.54mm:PinHeader_2x25_P2.54mm_Horizontal | J1 |
Similar boards
- 2 layers297.2 × 180.3 mm

- 2 layers99.1 × 99.7 mm

RC6502 General Video Adapter
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
80 parts193GPL-3.0 - 2 layers31 × 31 mm

Vga sync combiner for audi rns e
noobychris/vga-sync-combiner-audi-rnse
VGA RGBHV to RGBS sync combiner PCB for converting separate H/V sync into composite sync, tested with Audi RNS-E.
19 parts7CERN-OHL-P-2.0 - 2 layers93 × 67.5 mm

HyperDisplay
RetroRemake/HyperDisplay
Channel splitter for C128, CGA, and EGA video
34 parts7CERN-OHL-W-2.0 - 2 layers368.3 × 215.9 mm

- 4 layers120.2 × 104.1 mm

- 4 layers161.1 × 82.9 mm

- 4 layers244.5 × 393.4 mm

Questions
How big is the Zeal8bit rcbus PCB?
It measures 105 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Zeal8bit rcbus use?
10 parts, built around the 74HCT86D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zeal8bit rcbus KiCad files?
From the kolontsov/zeal8bit-rcbus repository on GitHub, at the commit this page was made from: the board is zeal8bit-rcbus.kicad_pcb and its schematic zeal8bit-rcbus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zeal8bit rcbus design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).