
DI Lambda UNO bottom
koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

Schematics for AVR-based DI-Lambda DITOS and UNO v1
DI Lambda UNO top is an open-source printed circuit board by koi-science, from the koi-science/DI-Lambda-schematics-avr repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 38.2 × 128 mm with 44 parts on 56 nets, routed with 429 tracks and 46 vias.
Its parts include 13 capacitors, 11 connectors, 8 resistors, 3 switches and 2 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF 25v | Capacitor_SMD:C_0603_1608Metric | C202, C208, C209, C210, C211, C212, C213 |
| 4 | 1.5K | Resistor_SMD:R_0603_1608Metric | R205, R206, R207, R208 |
| 4 | 4.7uF 6.3v | Capacitor_SMD:C_0603_1608Metric | C201, C205, C206, C207 |
| 4 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical_SMD_vias | J203, J204, J207, J208 |
| 4 | Conn_02x04_Odd_Even | Board_grooves:Pocket_1.6mm_7mm_no_cap | J201, J202, J209, J210 |
| 4 | Mounting_Hole | Mounting-holes:Mounting-Hole-SMT-nut-M3-4.3mm | MK202, MK203, MK204, MK205 |
| 2 | 10pF 25V | Capacitor_SMD:C_0603_1608Metric | C203, C204 |
| 2 | 4.75K | Resistor_SMD:R_0603_1608Metric | R203, R204 |
| 2 | Conn_02x03_Odd_Even | Board_grooves:Pocket_1.6mm_7mm_no_cap | J205, J206 |
| 1 | 220R | Resistor_SMD:R_0603_1608Metric | R201 |
| 1 | 390R | Resistor_SMD:R_0603_1608Metric | R202 |
| 1 | 8Mhz | Crystal:Crystal_SMD_HC49-SD | Y201 |
| 1 | Conn_01x05 | test_points:Testpoint_1x05_P2.54mm_mixed | J211 |
| 1 | LCD_1.44_ST7735 | LCD:LCD_1.44_ST7735 | U201 |
| 1 | Mounting_Hole | DI-Lambda-module-tabs:Button_mounts_x3 | MK201 |
| 1 | Mounting_Hole | Cuvette-holder:Cuvette-cutout-top | MK206 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U202 |
| 1 | SW_BLANK | Button_Switch_SMD:SW_SPST_B3SL-1002P | SW203 |
| 1 | SW_MODE | Button_Switch_SMD:SW_SPST_B3SL-1002P | SW202 |
| 1 | SW_SAMPLE | Button_Switch_SMD:SW_SPST_B3SL-1002P | SW201 |

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1





mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos

qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino

Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.

It measures 38.2 × 128 mm and has 2 copper layers, 1.6 mm thick.
44 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the koi-science/DI-Lambda-schematics-avr repository on GitHub, at the commit this page was made from: the board is DI-Lambda-UNO/DI-Lambda-UNO-top/DI-Lambda-UNO-top.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).