
PUTrain repeater
knspektrum/putrain-pcb
kolaboracja między PUTrain a spektrum - PCB na nadajniki/repeatery/odbiorniki lora

kolaboracja między PUTrain a spektrum - PCB na nadajniki/repeatery/odbiorniki lora
Put train is an open-source printed circuit board by knspektrum, from the knspektrum/putrain-pcb repository on GitHub. It is a 2-layer board of 90 × 75 mm with 5 parts on 46 nets, routed with 63 tracks and 0 vias.
It is built around the ESP32-S3-DEVKITC-1-N8R8. Its parts include 2 connectors and 1 IC. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x01_Socket | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | GND, J3 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 1 | ESP32-S3-DEVKITC-1-N8R8 | kicad_symbols:ESP32-S3-DEVKITC-1-N8R8 | U1 |

knspektrum/putrain-pcb
kolaboracja między PUTrain a spektrum - PCB na nadajniki/repeatery/odbiorniki lora

knspektrum/putrain-pcb
kolaboracja między PUTrain a spektrum - PCB na nadajniki/repeatery/odbiorniki lora

Joris1306/Collecteur_de_donnees_animalieres
Bienvenue sur le dépôt officiel du projet Piège Photographique avec Classification Animale par IA. Nous sommes une équipe de six étudiants ingénieurs de Polytech Nantes ayant dédié une année universitaire complète à la…

msafeerhassan/linefollowingrobot
Line Following Robot with PID project uses IR Sensors, Microcontroller and Motors to follow a line path on the floor.

Cib0rg/macroboard
Устройство аналогично Elgato Stream Deck, но с открытым исходным кодом. Каждая кнопка имеет собственный круглый дисплей 160×160 для отображения иконок, RGB LED подсветку и программируемое действие.





mohamed1920said/STARTUP
KiCad 10 carrier board for the AMR central gateway firmware. The board accepts an ESP32-S3-DevKitC-1-N8R8, adds a soldered RFM95W 868 MHz radio, protected sensor interfaces, regulated 7-18 V input, an enclosure-button…
It measures 90 × 75 mm and has 2 copper layers, 1.6 mm thick.
5 parts, built around the ESP32-S3-DEVKITC-1-N8R8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the knspektrum/putrain-pcb repository on GitHub, at the commit this page was made from: the board is put_train/put_train.kicad_pcb and its schematic PUTrain/PUTrain.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask knspektrum before reusing the design.