2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers21.8 × 68.1 mm
Hub75-adapter
Knifa/pi2hub75PCBs to connect HUB75 LED panels to the Raspberry Pi
- Size
- 21.8 × 68.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 22
- Pads
- 64
- Tracks, vias
- 99, 12
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Aug 2024
- Updated
- 3 Sep 2024
Overview
Hub75-adapter is an open-source printed circuit board by Knifa, from the Knifa/pi2hub75 repository on GitHub. It is a 2-layer board of 21.8 × 68.1 mm with 10 parts on 22 nets, routed with 99 tracks and 12 vias.
Its parts include 4 connectors, 2 capacitors, 1 resistor and 1 diode. It belongs with the interfaces and adapters boards of this library.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 330u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2, C3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 5V_IN | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J2 |
| 1 | 5V_OUT_MATRIX | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J4 |
| 1 | D_EN | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP2 |
| 1 | D_TVS | Diode_THT:D_DO-15_P10.16mm_Horizontal | D1 |
| 1 | E_EN | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP1 |
| 1 | HUB75 | Connector_IDC:IDC-Header_2x08_P2.54mm_Horizontal | J3 |
| 1 | PI | hub75-adapter:PiHeader | J1 |
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the Hub75-adapter PCB?
It measures 21.8 × 68.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hub75-adapter use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hub75-adapter KiCad files?
From the Knifa/pi2hub75 repository on GitHub, at the commit this page was made from: the board is hub75-adapter.kicad_pcb and its schematic hub75-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hub75-adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask Knifa before reusing the design.