
CROSSFIRE PCB IMAGE SPLITTER
Koolkatze/DIY-CROSSFIRE-AR-OPTICS
Lately I've been playing around with optics and I've made this DIY AR Glasses project to make things easyer.

Schematics and PCB for USB-HS dev-board with STM32F205
Pcb f2-a is an open-source printed circuit board by knielsen, from the knielsen/pcb_f2_usb_hs repository on GitHub. It is a 4-layer board of 88 × 60 mm with 79 parts on 88 nets, routed with 1,375 tracks and 214 vias.
It is built around the LP2985-18DBV. Its parts include 28 capacitors, 22 resistors, 8 connectors, 7 diodes and 4 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitors_SMD:C_0603 | C1, C2, C3, C4, C5, C6, C15, C18, C19, C20, C22, C26 |
| 8 | 47k | Resistors_SMD:R_0805 | R1, R6, R7, R8, R10, R11, R12, R14 |
| 7 | LED_Small | LEDs:LED_0805_HandSoldering | D1, D2, D3, D4, D5, D6, D7 |
| 6 | 1k | Resistors_SMD:R_0805 | R15, R16, R17, R18, R19, R20 |
| 6 | 2.2u | Capacitors_SMD:C_0805 | C8, C10, C11, C12, C13, C14 |
| 4 | 0 | Resistors_SMD:R_0805 | R2, R3, R4, R50 |
| 3 | 2u2 | Capacitors_SMD:C_0805 | C21, C23, C28 |
| 2 | 10k | Resistors_SMD:R_0805 | R5, R9 |
| 2 | 20p | Capacitors_SMD:C_0603 | C24, C25 |
| 2 | 22p | Capacitors_SMD:C_0603 | C16, C17 |
| 2 | 30@100MHz | Capacitors_SMD:C_0603 | L1, L2 |
| 2 | RGB_LED_SMALL | knielsenlib:RGB_0603 | LD1, LD2 |
| 1 | 10n | Capacitors_SMD:C_0603 | C9 |
| 1 | 1u | Capacitors_SMD:C_0805 | C27 |
| 1 | 2k2 | Resistors_SMD:R_0805 | R21 |
| 1 | 4.7u | Capacitors_SMD:C_0805 | C7 |
| 1 | 8k06 | Resistors_SMD:R_0805 | R13 |
| 1 | CRYSTAL | knielsenlib:2-SOJ | X1 |
| 1 | CSM-7X 24MHz | knielsenlib:Crystal_SMD_HC49-US | X2 |
| 1 | DFU | knielsenlib:switch_msk_12c02 | SW1 |
| 1 | GPIO1 | Socket_Strips:Socket_Strip_Straight_2x12_Pitch2.54mm | J3 |
| 1 | GPIO2 | Socket_Strips:Socket_Strip_Straight_2x12_Pitch2.54mm | J4 |
| 1 | I2S | Pin_Headers:Pin_Header_Straight_1x07_Pitch2.54mm | J2 |
| 1 | LP2985-1.8 | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | LP38691 | knielsenlib:TO-252-3 | U3 |
| 1 | MICRO-SD | knielsenlib:SD_502774 | P4 |
| 1 | POWER | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | JP1 |
| 1 | RESET | knielsenlib:SWITCH_FSMJSMA | B1 |
| 1 | SERIAL | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J1 |
| 1 | STM32F20X_LQFP64 | knielsenlib:LQFP_64 | U1 |
| 1 | SWD | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | P1 |
| 1 | USB3320 | knielsenlib:QFN-32-USB-3320 | U2 |
| 1 | USB_FS | knielsenlib:10103594-0001LF | P2 |
| 1 | USB_HS | knielsenlib:10103594-0001LF | P3 |
| 1 | USER_BUT | knielsenlib:SWITCH_FSMJSMA | B2 |

Koolkatze/DIY-CROSSFIRE-AR-OPTICS
Lately I've been playing around with optics and I've made this DIY AR Glasses project to make things easyer.

SpaceTeam/STS1_RF_Module
The full RF path of the STS1 COBC broken out as a separate module for testing and fun.




hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

danbowles/klorball35
Each half carries a 5-column × 3-row main matrix plus a 3-key (left) and 2-key (right)thumb cluster. The right hand gives up one key to make room for the trackball, so the two halves are 18 (left) + 17 (right) = 35 keys.

It measures 88 × 60 mm and has 4 copper layers, 1.6 mm thick.
79 parts, built around the LP2985-18DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the knielsen/pcb_f2_usb_hs repository on GitHub, at the commit this page was made from: the board is pcb-f2-a.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask knielsen before reusing the design.