Skip to the content
2 layers90 × 62 mmPcb esp, the printed circuit board in 3D

PCB for labitat small displays and ESP8266

Size
90 × 62 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
60
Pads
155
Tracks, vias
485, 52
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20170123)
Created
19 Jul 2017
Updated
21 Jul 2017

Overview

Pcb esp is an open-source printed circuit board by knielsen, from the knielsen/pcb_esp_display repository on GitHub. It is a 2-layer board of 90 × 62 mm with 32 parts on 60 nets, routed with 485 tracks and 52 vias.

It is built around the ESP-12E and S8050. Its parts include 14 resistors, 4 capacitors, 3 ICs, 3 connectors and 2 transistors. It belongs with the ESP8266 boards of this library.

Main components

2

Parts

32
QtyValueFootprintReferences
710kResistors_SMD:R_0805_HandSolderingR2, R3, R4, R5, R6, R7, R9
5220Resistors_SMD:R_1206_HandSolderingR10, R11, R12, R13, R14
5SWITCH_4PINButtons_Switches_THT:SW_TH_Tactile_Omron_B3F-10xxB1, B2, B3, B4, B5
22.2uCapacitors_SMD:C_0805_HandSolderingC2, C3
2S8050TO_SOT_Packages_SMD:SOT-23_HandsolderingQ1, Q2
10Resistors_SMD:R_1206_HandSolderingR1
110Resistors_SMD:R_0805_HandSolderingR8
1100Potentiometers:Potentiometer_Trimmer_Bourns_3296WRV1
1100nCapacitors_SMD:C_0805_HandSolderingC1
1100uCapacitors_Tantalum_SMD:CP_Tantalum_Case-U_EIA-6032-15_HandC4
1CONN_01X03knielsenlib:con-jack-DCJ0303J2
1CONN_01X07Pin_Headers:Pin_Header_Angled_1x07_Pitch2.54mmJ1
1CONN_01X17Pin_Headers:Pin_Header_Angled_1x17_Pitch2.54mmJ3
1ESP-12EESP8266:ESP-12E_SMDU2
1ET024002DMUknielsenlib:ET024002DMU_othersideU3
1LP38691knielsenlib:TO-252-3U1

Similar boards

  • 2 layers49 × 25 mmSlimeVR Tracker, the printed circuit board in 3D

    SlimeVR Tracker

    CoreanXka/SlimeVR-Tracker

    基于上述原因,诞生了这个项目,解决了上面的问题,并具有以下特点: - 超小尺寸,超高集成度,仅比开发板长1mm。 - 整合接口,仅用一个Type-C接口实现充电与程序下载。 - 集成最最最重要的电池保护芯片。 - 预留电池引脚接口和开关引脚接口,锂电池不再直连3.3V引脚,而是会先经过降压芯片降压后输出。 - 智能切换供电,在有外部USB供电的情况下会切断锂电池供电并进行充电,断开供电后自动使用锂电池供电。 -…

    40 parts6GPL-3.0
  • 2 layers109.3 × 45.4 mmAVR BRIDGE ATMEGA328P, the printed circuit board in 3D

    AVR BRIDGE ATMEGA328P

    MCLEANS/AVR-BRIDGE-ATMEGA328P-PCB

    PCB design for the AVR-BRIDGE ATMEGA328P test board

    55 parts1
  • 2 layers92 × 82 mmLakeTemp, the printed circuit board in 3D

    LakeTemp

    foorschtbar/LakeTempESP

    One of my first electronic projects 2011 based on a breadboard. It has lasted almost 10 years of continuous operation.

    62 parts
  • 2 layers77 × 57 mmPcb esp, the printed circuit board in 3D

    Pcb esp

    knielsen/pcb_esp_dualboard

    Dual PCB, with ST7787 display breakout board on top of ESP8266 motherboard

    27 parts
  • 2 layers93.2 × 59.2 mmUVLightV2-5, the printed circuit board in 3D

    UVLightV2-5

    xLordiz3/PCBs

    53 parts
  • 2 layers67.3 × 66.5 mmEsp32 programmer, the printed circuit board in 3D

    Esp32 programmer

    ZhengLinLei/pcb-project-kicad

    Collection of Kicad pcb design

    41 parts
  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470

Questions

How big is the Pcb esp PCB?

It measures 90 × 62 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pcb esp use?

32 parts, built around the ESP-12E and S8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcb esp KiCad files?

From the knielsen/pcb_esp_display repository on GitHub, at the commit this page was made from: the board is pcb_esp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcb esp design in my own project?

Its repository states no licence, so its author keeps all rights: ask knielsen before reusing the design.