4 layers50 × 50 mm
4 layers100 × 68 mm
Pcb ledtorus controller
knielsen/pcb_ledtorus_controller2Controller PCB for LED-torus - motor-controller, wireless communication, and PS2 controllers
- Size
- 100 × 68 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 88
- Pads
- 431
- Tracks, vias
- 867, 173
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170123)
- Created
- 29 Dec 2018
- Updated
- 2 Jun 2019
Overview
Pcb ledtorus controller is an open-source printed circuit board by knielsen, from the knielsen/pcb_ledtorus_controller repository on GitHub. It is a 4-layer board of 100 × 68 mm with 85 parts on 88 nets, routed with 867 tracks and 173 vias.
It is built around the BAV99LT3G, SML-211UTT86 and SML-211YTT86. Its parts include 32 resistors, 25 capacitors, 7 diodes, 7 connectors and 5 ICs. It belongs with the robots and motor control boards of this library.
Main components
3
BAV99LT3G
SOT-23-65℃~+150℃@(Tj) 1 Pair Series Connection 1.25V@150mA 100V 1uA@100V 215mA 2A 6ns SOT-23 Switching Diodes ROHSonsemiSwitching Diodes
SML-211UTT86
0805-30℃~+85℃ 0.9mcd 1.4mm x 1.25mm square LED 1.8V 2mA 44mW 620nm Discrete Diode Red Water Clear 0805 LED Indication - Discrete ROHSROHM SemiconductorLED Indication - DiscreteSML-211YTT86
2012(0805)-30℃~+85℃ 1.4mcd 1.4mm x 1.25mm square LED 1.8V 2mA 44mW 587nm AlGaInP、GaAs Discrete Diode Water Clear Yellow 2012(0805) LED Indication - Discrete ROHSROHM SemiconductorLED Indication - Discrete
Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitors_SMD:C_0603 | C2, C3, C4, C5, C6, C10, C11, C14 |
| 8 | 5k | Resistors_SMD:R_0603 | R6, R7, R12, R13, R17, R18, R20, R21 |
| 5 | 4k7 | Resistors_SMD:R_0603 | R25, R26, R27, R30, R33 |
| 4 | 2k2 | Resistors_SMD:R_0603 | R8, R14, R19, R22 |
| 4 | 47k | Resistors_SMD:R_0805 | R4, R9, R10, R11 |
| 4 | 7V | Diodes_SMD:D_SOD-123 | D3, D5, D6, D7 |
| 4 | mounting_hole | Mounting_Holes:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 3 | 0 | Resistors_SMD:R_0805 | R23, R24, R28 |
| 3 | 10n | Capacitors_SMD:C_0805 | C1, C17, C25 |
| 3 | 1u | Capacitors_SMD:C_0805 | C12, C18, C23 |
| 2 | 0R22 | Resistors_SMD:R_0805 | R15, R16 |
| 2 | 10p | Capacitors_SMD:C_0805 | C8, C9 |
| 2 | 10u | Capacitors_SMD:C_0805 | C7, C20 |
| 2 | 1k | Resistors_SMD:R_0805 | R3, R5 |
| 2 | 22u | Capacitors_SMD:C_0805 | C21, C22 |
| 2 | CONN_01X09 | knielsenlib:DualShock_conn | P3, P4 |
| 1 | 100 | Resistors_SMD:R_0805 | R1 |
| 1 | 100u | w_smd_cap:c_elec_6.3x7.7 | C15 |
| 1 | 10k | Resistors_SMD:R_0805 | R2 |
| 1 | 15k | Resistors_SMD:R_0603 | R31 |
| 1 | 2.2u | Capacitors_SMD:C_0805 | C13 |
| 1 | 220n | Capacitors_SMD:C_0805 | C16 |
| 1 | 22n | Capacitors_SMD:C_0603 | C19 |
| 1 | 2u2 | Capacitors_SMD:C_0805 | C24 |
| 1 | 30@100MHz | Inductors_SMD:L_0603 | L1 |
| 1 | 3k3 | Resistors_SMD:R_0603 | R32 |
| 1 | 4u7 | knielsenlib:Coil_WE_7447786004 | L2 |
| 1 | BAV99LT3G | TO_SOT_Packages_SMD:SOT-23 | D4 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J1 |
| 1 | CONN_3 | knielsenlib:dc_socket | P6 |
| 1 | CONN_3X2 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | P5 |
| 1 | CONN_4X2 | Pin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm | P1 |
| 1 | CONN_9 | Pin_Headers:Pin_Header_Straight_1x09_Pitch2.54mm | P2 |
| 1 | KNUSB | knielsenlib:10103594-0001LF | U3 |
| 1 | L6234 | knielsenlib:POWERSO20_stencil | U4 |
| 1 | LP2985LV | TO_SOT_Packages_SMD:SOT-23-5 | U5 |
| 1 | NX5032GA-16MHz | knielsenlib:NX5032GA | X1 |
| 1 | SML-211UTT86 | LEDs:LED_0805 | D1 |
| 1 | SML-211YTT86 | LEDs:LED_0805 | D2 |
| 1 | SWITCH_4PIN | knielsenlib:SWITCH_FSMJSMA | B1 |
| 1 | Switch_3 | knielsenlib:DIPSWITCH_X3 | SW1 |
| 1 | TM4C1232XXPM | knielsenlib:LQFP_64 | U1 |
| 1 | TS3001x | knielsenlib:QFN16-TS30001 | U6 |
Questions
How big is the Pcb ledtorus controller PCB?
It measures 100 × 68 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Pcb ledtorus controller use?
85 parts, built around the BAV99LT3G, SML-211UTT86 and SML-211YTT86. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb ledtorus controller KiCad files?
From the knielsen/pcb_ledtorus_controller repository on GitHub, at the commit this page was made from: the board is pcb_ledtorus_controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb ledtorus controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask knielsen before reusing the design.
Similar boards
- 4 layers149 × 149 mm
- 4 layers93 × 108 mm
- 2 layers68.3 × 32.9 mm
- 4 layers50 × 85 mm
- 4 layers50 × 50 mm
USB Hub Test
osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow
85 parts712CC-BY-4.0 - 4 layers50 × 50 mm
- 4 layers50 × 36 mm
Analog toolkit
Jana-Marie/analog-toolkit
A smol and simple STM32G431 based Analog to USB toolkit.
85 parts74CERN-OHL-S-2.0