

2btn2led
Some small PCBs for manual-control panels
- Size
- 38.5 × 15 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 8
- Pads
- 28
- Tracks, vias
- 18, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Nov 2021
- Updated
- 27 Jan 2022
Overview
2btn2led is an open-source printed circuit board by kmzbrnoI, from the kmzbrnoI/panel-pcbs repository on GitHub. It is a 2-layer board of 38.5 × 15 mm with 14 parts on 8 nets, routed with 18 tracks and 0 vias.
Its parts include 6 capacitors, 2 resistors, 2 diodes and 2 switches.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | pad | Connector_Pin:Pin_D1.3mm_L11.0mm | C1, C2, CINPUT1, CINPUT2, COUTPUT1, COUTPUT2 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | SW_Push_DPDT | Switch_KMZ:KLS7 | SW1, SW2 |
More from kmzbrnoI/panel-pcbs
5- 2 layers23 × 37 mm

- 2 layers33.5 × 22.5 mm

- 2 layers29 × 24 mm

- 2 layers38.5 × 15 mm

- 2 layers24.5 × 15 mm

Similar boards
- 2 layers116.8 × 30 mm

Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm

- 2 layers34 × 45 mm

2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm

- 2 layers45.3 × 42.7 mm

- 2 layers42.5 × 28.8 mm

C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm

- 2 layers62 × 24 mm

Questions
How big is the 2btn2led PCB?
It measures 38.5 × 15 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 2btn2led use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 2btn2led KiCad files?
From the kmzbrnoI/panel-pcbs repository on GitHub, at the commit this page was made from: the board is 2btn2led/2btn2led.kicad_pcb and its schematic turnout-crossing/turnout-crossing.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 2btn2led design in my own project?
Its repository states no licence, so its author keeps all rights: ask kmzbrnoI before reusing the design.