Skip to the content
2 layers50 × 25 mmLithiumBatteryEmulator, the printed circuit board in 3D

LithiumBatteryEmulator

kms15/LithiumBatteryEmulator

A simple USB powered buck converter to emulate a ~4.2V lithium polymer battery

Size
50 × 25 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
14
Pads
75
Tracks, vias
167, 25
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
4 Jan 2020
Updated
6 Jan 2020

Overview

LithiumBatteryEmulator is an open-source printed circuit board by kms15, from the kms15/LithiumBatteryEmulator repository on GitHub. It is a 2-layer board of 50 × 25 mm with 36 parts on 14 nets, routed with 167 tracks and 25 vias.

Its parts include 16 capacitors, 6 inductors, 3 resistors, 1 IC and 1 connector. It belongs with the power boards of this library.

README

readme.md

LithiumBatteryEmulator

This is a PCB that emulates a ~4.2 volt lithium battery cell using power from a USB connector. It was designed to replace the battery cell in a Vocera badge with a wall supplied power supply, but may be useful for other project too.

The board is designed to meet the Seeed studios fusion PCB assembly requirements, including using the Seeed studio Open Part Library for KiCad.

License

Copyright Kendrick Shaw 2020 Licensed under the CERN OHL v.1.2 license.

Parts

36
QtyValueFootprintReferences
8TANTALUM-SMD-100UF-16V_AVX-C_OPL_Capacitor:AVX-C(2312)C9, C10, C11, C12, C13, C14, C15, C16
5CERAMIC-2.2UF-25V-10%-X7R_0805_OPL_Capacitor:C0805C1, C2, C3, C4, C7
5SMD-FERRITE-BEAD-330R-1500MA_0805_OPL_Inductor:L0805L1, L2, L3, L5, L6
2CERAMIC-100NF-50V-10%-X7R_0603_OPL_Capacitor:C0603C5, C8
1CERAMIC-20PF-50V-5%-NPO_0402_OPL_Capacitor:C0402C6
1DIP-JST-2P-2.0OPL_Connector:H2-2.0-6X4.5MMJ1
1MICRO-USB-SMD-B-_10118193-0001LF_OPL_Connector:MICRO-USB5+6P-SMD-0.65-BUSB1
1PMIC-DC-DC-ETA3406S2F-T_SOT23-5_OPL_Integrated_Circuit:SOT-23-5U1
1SMD-INDUCTOR-2.2UH-20%-1.2A_0805_OPL_Inductor:L0805L4
1SMD-RES-1.8K-1%-1_10W_0603_OPL_Resistor:R0603R1
1SMD-RES-150K-1%-1_10W_0603_OPL_Resistor:R0603R4
1SMD-RES-24K-1%-1_10W_0603_OPL_Resistor:R0603R2

The 28 most common of 36 parts.

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    36 parts1kGPL-3.0
  • 2 layers55 × 70 mmArduino v1, the printed circuit board in 3D

    Arduino v1

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    36 parts915
  • 2 layers50.4 × 24.8 mmLEDboardRev3, the printed circuit board in 3D

    LEDboardRev3

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    36 parts914
  • 2 layers45.7 × 31.8 mmLEDx16 board, the printed circuit board in 3D

    LEDx16 board

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    36 parts803MIT
  • 2 layers32 × 24 mmEsp onelayer3, the printed circuit board in 3D

    Esp onelayer3

    cnlohr/colorchord

    Chromatic Sound to Light Conversion System

    36 parts712
  • 2 layers69 × 53.8 mmTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    36 parts530
  • 2 layers99.1 × 53.3 mmABSIS Mega, the printed circuit board in 3D

    ABSIS Mega

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    36 parts431
  • 2 layers16.1 × 119 mmConnectorL, the printed circuit board in 3D

    ConnectorL

    thpoll83/PolyKybd

    PolyKybd

    36 parts411CERN-OHL-W-2.0

Questions

How big is the LithiumBatteryEmulator PCB?

It measures 50 × 25 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LithiumBatteryEmulator use?

36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LithiumBatteryEmulator KiCad files?

From the kms15/LithiumBatteryEmulator repository on GitHub, at the commit this page was made from: the board is LithiumBatteryEmulator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LithiumBatteryEmulator design in my own project?

Its repository states no licence, so its author keeps all rights: ask kms15 before reusing the design.