
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

SRF V1 is an open-source printed circuit board by kkbughunter, from the kkbughunter/PCB_Design repository on GitHub. It is a 2-layer board of 43.8 × 64.7 mm with 25 parts on 53 nets, routed with 155 tracks and 6 vias.
Its parts include 6 diodes, 5 resistors, 5 connectors, 3 ICs and 3 transistors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | D | Diode_THT:D_A-405_P7.62mm_Horizontal | D1, D2, D3, D4, D5 |
| 5 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5 |
| 3 | NPN | Package_TO_SOT_THT:TO-92L_Inline | Q1, Q2, Q3 |
| 2 | OP1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3, J5 |
| 2 | PC817 | Package_DIP:DIP-4_W7.62mm | U2, U3 |
| 2 | RELAY | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1, K2 |
| 1 | 5V | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J1 |
| 1 | ESP32 | RF_Module:ESP32-WROOM-32D | U1 |
| 1 | LED | LED_THT:LED_D3.0mm | D6 |
| 1 | Pro | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | Switch IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J4 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

It measures 43.8 × 64.7 mm and has 2 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kkbughunter/PCB_Design repository on GitHub, at the commit this page was made from: the board is Smart_Retrofit/SRF_V1.kicad_pcb and its schematic 001_Relay_Module/001_Relay_Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kkbughunter before reusing the design.