Skip to the content
2 layers140 × 91 mmOrbiter, the printed circuit board in 3D

Repo for my symmetrical 52-key split keyboard KiCad project

Size
140 × 91 mm
Copper layers
2
Thickness
1.6 mm
Parts
156
Nets
133
Pads
587
Tracks, vias
1,793, 363
Pours
326
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Oct 2023
Updated
5 Jul 2026

Overview

Orbiter is an open-source printed circuit board by kjeller, from the kjeller/orbiter_keyboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 140 × 91 mm with 156 parts on 133 nets, routed with 1,793 tracks and 363 vias.

It is built around the TPS82140SILR, WS2812B and BSS138, with the USBLC6-2SC6 among its other parts. Its parts include 58 diodes, 28 switches, 21 capacitors, 17 resistors and 5 connectors. It belongs with the keyboards and input boards and the STM32 boards of this library.

Main components

4

README

README.md

Orbiter Keyboard

A 52-key split keyboard.

Split keyword showcase

!!DISCLAIMER!! There are issues with v1.00 that needs manual patching:

  • BOOT0 logic is reversed which makes device always go into DFU mode, R6 needs to be connected to GND
  • USB-C CC pin pull-up is common, which makes the USB cable one-way, CC1 and CC2 each needs a 5.1k pull-down resistor

Parts

156
QtyValueFootprintReferences
521N4001Diode_SMD:D_SOD-323_HandSolderingD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +36
26SW_PushPCM_Switch_Keyboard_Kailh_Reversible:SW_Kailh_Choc_V2_1.00u_ReversibleSW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24 +10
11TestPoint_SmallTestpoint_Rev:TestPoint_THTPad_D1.0mm_Drill0.5mm_reversibleCOL1, COL2, COL3, COL4, COL5, COL6, ROW1, ROW2, ROW3, ROW4, ROW5
10100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5, C6, C7, C8, C9, C14, C15, C16, C17, C18
7MountingHole_PadMountingHole_NoSilkscreen:MountingHole_2.7mm_M2.5_DIN965_Pad_reversibleH1, H2, H3, H4, H5, H6, H7
6100nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC10, C11, C12, C19, C20, C21
610kResistor_SMD:R_0603_1608MetricR6, R7, R17, R18, R20, R21
6WS2812BLED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mmD59, D60, D61, D62, D63, D64
48.2kResistor_SMD:R_0603_1608MetricR5, R9, R10, R11
2100kResistor_SMD:R_0603_1608MetricR1, R4
222Resistor_SMD:R_0603_1608MetricR16, R19
222uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C3
24u7Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC4, C13
25.1kResistor_SMD:R_0603_1608MetricR2, R8
2AudioJack4Connector_Audio:Jack_3.5mm_PJ320D_HorizontalJ2, J4
2BSS138Package_TO_SOT_SMD:SOT-23Q1, Q2
2STM32F072CBTxPackage_QFP:LQFP-48_7x7mm_P0.5mmMCU1, MCU2
2SW_PushButton_Switch_SMD:SW_SPST_PTS647_Sx38SW29, SW30
2USB_C_Plug_USB2.0Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11USB_P1, USB_P2
1309kResistor_SMD:R_0603_1608MetricR3
1430pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2
1I2C ExtensionConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ3
1Keyboard matrixConnector_PinSocket_2.54mm:PinSocket_1x11_P2.54mm_VerticalJ5
1LOGOfluff:kjellc__10x10G***
1SWDConnector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_VerticalJ1
1TPS82140SILRTPS82140SILR:TPS82140SILRU1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6USB_U1

Similar boards

  • 2 layers68.4 × 36.7 mmEmf beacon, the printed circuit board in 3D

    Emf beacon

    PolybiusBiotech/led_beacon

    The PCBA and firmware for the controllable LED Beacons.

    134 parts
  • 2 layers390 × 120.2 mmKeyboard, the printed circuit board in 3D

    Keyboard

    joshajohnson/entropy

    Strange keyboard with a left hand numpad

    334 parts97
  • 2 layers89 × 124 mmHub20, the printed circuit board in 3D

    Hub20

    joshajohnson/Hub20

    Hub20 is a numpad with a bunch of features you never knew you needed.

    183 parts68
  • 4 layers177 × 118 mmE ink picture frame, the printed circuit board in 3D

    E ink picture frame

    bkuhn4/e-ink-picture-frame

    To make it easy for you to get started with GitLab, here's a list of recommended next steps.

    110 parts
  • 4 layers170.2 × 111.2 mmE paper picture frame HW, the printed circuit board in 3D

    E paper picture frame HW

    JosefTAv/E-paper-picture-frame-HW

    Hardware files for ESP32 based E-paper picture frame

    110 partsMIT
  • 2 layers84.3 × 65 mmChief, the printed circuit board in 3D

    Chief

    joshajohnson/chief

    Macropad designed by Bing

    60 parts
  • 2 layers61.7 × 108 mmPanel pcb, the printed circuit board in 3D

    Panel pcb

    knonyks/onyks-iot-zigbee-panel-sterujacy-z-wyswietlaczem

    Panel sterujący z wyświetlaczem

    40 parts
  • 2 layers148.2 × 114.4 mmLeft pcb, the printed circuit board in 3D

    Left pcb

    mayjs/maykb_g4

    My fourth custom split keyboard with ANSI layout

    121 partsGPL-3.0

Questions

How big is the Orbiter PCB?

It measures 140 × 91 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Orbiter use?

156 parts, built around the TPS82140SILR, WS2812B, BSS138 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Orbiter KiCad files?

From the kjeller/orbiter_keyboard repository on GitHub, at the commit this page was made from: the board is pcb/orbiter-wired/orbiter.kicad_pcb and its schematic pcb/orbiter-wired/keyboard_matrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Orbiter design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).