

AVR ISP PWR
Simple AVR ISP breakout to inject power from a lab supply
- Size
- 55 × 16 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 6
- Pads
- 14
- Tracks, vias
- 41, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Aug 2024
- Updated
- 13 Aug 2024
Overview
AVR ISP PWR is an open-source printed circuit board by kiu, from the kiu/AVR-ISP-PWR repository on GitHub. It is a 2-layer board of 55 × 16 mm with 3 parts on 6 nets, routed with 41 tracks and 3 vias.
It belongs with the interfaces and adapters boards of this library.
README
README.mdAVR-ISP-PWR
Simple AVR ISP breakout to inject power from a lab supply
License
This project is licensed under the Creative Commons Attribution-NonCommercial 3.0 Unported (CC BY-NC 3.0) license.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | AVR-ISP-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2, J3 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00287_1x02_P5.08mm_Horizontal | J1 |
Similar boards
- 2 layers40 × 30 mm

- 2 layers51.9 × 16 mm

Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm

- 2 layers

Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm

- 2 layers124.5 × 33.7 mm

- 2 layers10.5 × 83 mm

- 2 layers21.2 × 51.3 mm

Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the AVR ISP PWR PCB?
It measures 55 × 16 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AVR ISP PWR use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AVR ISP PWR KiCad files?
From the kiu/AVR-ISP-PWR repository on GitHub, at the commit this page was made from: the board is kicad/AVR-ISP-PWR.kicad_pcb and its schematic kicad/AVR-ISP-PWR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AVR ISP PWR design in my own project?
Its repository states no licence, so its author keeps all rights: ask kiu before reusing the design.