2 layers271.8 × 114.3 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
426 parts282
2 layers89 × 73 mm
Feinstaubnode
kiu/feinstaubnode1feinstaubnode is a citizen science project measuring air quality (PM2.5/PM10) and temperature/humidity across Germany.
- Size
- 89 × 73 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 6
- Pads
- 46
- Tracks, vias
- 49, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 25 Feb 2017
- Updated
- 17 Mar 2017
Overview
Feinstaubnode is an open-source printed circuit board by kiu, from the kiu/feinstaubnode repository on GitHub, published under the MIT licence. It is a 2-layer board of 89 × 73 mm with 8 parts on 6 nets, routed with 49 tracks and 0 vias.
It is built around the DHT22. Its parts include 2 ICs and 1 connector. It belongs with the ESP8266 boards of this library.
Main components
1README
README.mdfeinstaubnode
First try at using KiCAD.
https://schoar.de/tinkering/feinstaubnode
ERRATA
REV A: TX und RX sind vertauscht. Kann im Verbindungskabel entsprechend geändert werden.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | DHT22 | TO_SOT_Packages_THT:TO-220-4_Vertical | U2 |
| 1 | NodeMCUV3 | kiu:NodeMCUV3-NoHoles | U1 |
| 1 | SDS011 | Pin_Headers:Pin_Header_Angled_1x05_Pitch2.54mm | P1 |
The 3 most common of 8 parts.
Questions
How big is the Feinstaubnode PCB?
It measures 89 × 73 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Feinstaubnode use?
8 parts, built around the DHT22. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Feinstaubnode KiCad files?
From the kiu/feinstaubnode repository on GitHub, at the commit this page was made from: the board is pcb/feinstaubnode.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Feinstaubnode design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers104.8 × 72.1 mm
SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework
53 parts110GPL-2.0 - 2 layers40.6 × 50.8 mm
Iot sourdough starter monitor
justinmklam/iot-sourdough-starter-monitor
Tracking the fermentation of sourdough starter over the cloud.
7 parts93GPL-3.0 - 2 layers28 × 13 mm
DHT22 pcb
MakersAsylumIndia/M19O2
M19O2 open source hardware Oxygen Concentrator based on the Pressure Swing Adsorption cycle aka Skarstorm cycle
5 parts68MIT - 2 layers136 × 100 mm
ClimateSprinklerController
kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome
194 parts56 - 2 layers162 × 60 mm
Esp shield
felixwittwer/homeassistant_automaic_greenhouse
A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.
20 parts27 - 2 layers74.9 × 40.6 mm
Anavi thermometer
AnaviTechnology/anavi-thermometer
WiFi Smart Thermometer with ESP8266, DHT22, DS18B20, OLED display and slots for up to 3 I2C sensor modules
25 parts17 - 2 layers81.3 × 36.8 mm
AirQualitySensor
Finomnis/AirQualitySensor
Simple Air Quality sensor based on nRF52840, Zigbee, AM2302/DHT22 and Senseair S8
44 parts16Apache-2.0