Skip to the content
2 layers56.9 × 38.6 mmV1a, the printed circuit board in 3D

the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

Size
56.9 × 38.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
43
Pads
84
Tracks, vias
280, 66
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
12 Jan 2024
Updated
18 Jan 2025

Overview

V1a is an open-source printed circuit board by KITTY-6502, from the KITTY-6502/hardware repository on GitHub. It is a 2-layer board of 56.9 × 38.6 mm with 6 parts on 43 nets, routed with 280 tracks and 66 vias.

Its parts include 2 diodes, 1 capacitor, 1 resistor, 1 IC and 1 connector.

README

README.md

KITTY Computer

the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

Quick Specs:

  • Bus Speed: 3Mhz
  • CPU:* w65c02s @~2.2Mhz (average)
  • RAM: 28Kb SRAM
  • Video: Custom, 256x256pixels, a text mode display using a preset font, 32x32 8x8 pixel characters, 16 color palette
  • Sound: Custom, 8x1 Wavetable Audio, 3 melodic + 1 percussive channels, all with 4bit+4bit stereo volume control.
  • Input: 40-Key Mechanical Keyboard
  • Media/Expansion: 2 Cartridge Slots, each with up to 128x32Kb banks.
  • Interrupts: /IRQ triggered when the video circuit has drawn the last visible pixels on the frame.
  • Output: RGB PAL (50hz), via a SCART connector.

Computer Manual Schematic

Picture of Prototype Board Test Program

Parts

6
QtyValueFootprintReferences
21N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2
1100nFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1
110KΩResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1Conn_02x22_Odd_EvenSmal:KITTY_Cart_EdgeJ1
1SST39SF040PCM_Package_LCC_AKL:PLCC-32_THT-SocketU1

More from KITTY-6502/hardware

9
  • 2 layers234 × 100 mmV2b, the printed circuit board in 3D

    V2b

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    147 parts
  • 2 layers234 × 100 mmV1c, the printed circuit board in 3D

    V1c

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    145 parts
  • 2 layers234 × 87.3 mmV1a, the printed circuit board in 3D

    V1a

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    134 parts
  • 2 layers234 × 87.3 mmV0c, the printed circuit board in 3D

    V0c

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    123 parts
  • 2 layers240.3 × 76 mmKeyboard, the printed circuit board in 3D

    Keyboard

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    84 parts
  • 2 layers56.9 × 38.6 mmV1a, the printed circuit board in 3D

    V1a

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    11 parts
  • 2 layers56.9 × 38.6 mmV1a, the printed circuit board in 3D

    V1a

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    8 parts
  • 2 layers58.4 × 40 mmV2a, the printed circuit board in 3D

    V2a

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    7 parts
  • 2 layers58.4 × 40 mmV2a, the printed circuit board in 3D

    V2a

    KITTY-6502/hardware

    the KITTY is a 65c02 homebrew kit microcomputer designed around text mode graphics and cartridge media. It is fully open source, and uses exclusively in-production parts.

    4 parts

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the V1a PCB?

It measures 56.9 × 38.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the V1a use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the V1a KiCad files?

From the KITTY-6502/hardware repository on GitHub, at the commit this page was made from: the board is Kicad/romcart/v1a/v1a.kicad_pcb and its schematic Kicad/case/back/back.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the V1a design in my own project?

Its repository states no licence, so its author keeps all rights: ask KITTY-6502 before reusing the design.