4 layers310 × 210 mm
2 layers80 × 90 mm
Psoc pcb asic base
kit-kch/psoc-pcb-asic-baseConnect the psoc-pcb-ihp0925 ASIC carrier to the psoc-pcb-fmc peripheral board
- Size
- 80 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 102
- Pads
- 217
- Tracks, vias
- 530, 188
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Oct 2025
- Updated
- 8 Oct 2025
Overview
Psoc pcb asic base is an open-source printed circuit board by kit-kch, from the kit-kch/psoc-pcb-asic-base repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 80 × 90 mm with 21 parts on 102 nets, routed with 530 tracks and 188 vias.
It is built around the ASP-134603-01. Its parts include 6 connectors and 4 resistors.
Main components
1README
README.mdPSoC ASIC BASE PCB
This repository contains schematic and layout for the Base PCB for the PSoC ASIC. It can be used to connect the main PSoC FMC PCB with the PSoC ASIC Carrier PCB.
The following features are provided by the PCB:
- External power connector J6
- With psoc-pcb-fmc, power can be supplied from FMC (this is non-standard use of FMC). Place
R3/R4to use this feature. - Pull up for the
XIPFlashQ2/Q3signals (nRSTandnWP).
For more information, refer to the psoc project website at kch.dev/psoc.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0 | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | ASP-134603-01 | psoc:SAMTEC_ASP-134603-01 | J5 |
| 1 | CONN_E | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | CONN_N | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | CONN_S | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J4 |
| 1 | CONN_W | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J1 |
| 1 | LOGO | psoc:qrcode | G*** |
| 1 | LOGO | psoc:qrcode_psoc | G*** |
| 1 | LOGO | psoc:kit_6mm | G*** |
| 1 | LOGO | psoc:itiv_6mm | G*** |
| 1 | LOGO | psoc:kch_6mm | G*** |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
The 15 most common of 21 parts.
Similar boards
- 6 layers69 × 76.5 mm
- 2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0
Questions
How big is the Psoc pcb asic base PCB?
It measures 80 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Psoc pcb asic base use?
21 parts, built around the ASP-134603-01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Psoc pcb asic base KiCad files?
From the kit-kch/psoc-pcb-asic-base repository on GitHub, at the commit this page was made from: the board is psoc-pcb-asic-base.kicad_pcb and its schematic psoc-pcb-asic-base.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Psoc pcb asic base design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).