4 layers59.2 × 66 mm
2 layers52.7 × 30.9 mm
Jlink adapter
KisonHe/jlink-adapter-pcb- Size
- 52.7 × 30.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 27
- Pads
- 111
- Tracks, vias
- 176, 11
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Aug 2022
- Updated
- 18 Oct 2023
Overview
Jlink adapter is an open-source printed circuit board by KisonHe, from the KisonHe/jlink-adapter-pcb repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 52.7 × 30.9 mm with 23 parts on 27 nets, routed with 176 tracks and 11 vias.
It is built around the USBLC6-4SC6. Its parts include 6 connectors, 5 resistors, 3 ICs, 2 capacitors and 2 diodes. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdjlink-adapter-pcb
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R1, R4 |
| 2 | 1uf | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | USBLC6-4SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3, U5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_ARM_JTAG_SWD_20 | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J2 |
| 1 | D | KisonNew:C8678 | D1 |
| 1 | ESPProgJTAG_TX | KisonNew:IDC_1.27mm_10P | J3 |
| 1 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | USB_A | Connector_USB:USB_A_CONNFLY_DS1095-WNR0 | J6 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XC6209 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
The 21 most common of 23 parts.
Questions
How big is the Jlink adapter PCB?
It measures 52.7 × 30.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Jlink adapter use?
23 parts, built around the USBLC6-4SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jlink adapter KiCad files?
From the KisonHe/jlink-adapter-pcb repository on GitHub, at the commit this page was made from: the board is jlink-adapter/jlink-adapter.kicad_pcb and its schematic jlink-adapter/jlink-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jlink adapter design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers94.4 × 72.8 mm
RP2040 base
Twisted-Fields/rp2040-motor-controller
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.
325 parts419 - 2 layers28 × 30 mm
- 2 layers51 × 18.5 mm
Entree
tuna-f1sh/entree
Entree is a USB-C CAN interface designed to fully support CANnectivity - gets the CAN party started!
78 parts89 - 2 layers99.8 × 99.8 mm
Stmbl 5.0
freakontrol/stmbl
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY.
432 parts53GPL-3.0 - 2 layers85 × 50 mm
APPMC
tdjastrzebski/All-Purpose-Power-Micro-Controller
General purpose power controller, capable of driving soldering irons using different voltages and probe types.
117 parts40 - 2 layers194 × 114.1 mm
- 4 layers66.4 × 163.6 mm
