Skip to the content
2 layersLiDi, the printed circuit board in 3D

LiDi (Light-Intuitive-Digital-Audio-Interface) for µBITX. Note: All the included designs (and some other ones) were simulated in LTspice, and then tested on air. Have fun, and 73!

Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
7
Pads
22
Tracks, vias
26, 4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
29 May 2021
Updated
14 Dec 2021

Overview

LiDi is an open-source printed circuit board by kholia, from the kholia/Light-Intuitive-Digital-Interface repository on GitHub. It is a 2-layer board with 11 parts on 7 nets, routed with 26 tracks and 4 vias.

It belongs with the audio and music and interfaces and adapters boards of this library.

README

README.md
LiDi

LiDi is Light-Intuitive-Digital-Audio-Interface for µBITX and other radios. It is meant to be homebrewed on a Zero PCB in under 30 minutes.

Design 2:

LiDi-v2 LiDi-v2 Schematic

Design 1:

LiDi-v1

LiDi-v2

Full Setup 1

Note: All the included designs (and some other ones) were simulated in LTspice, and then tested on air.

Sample testing setup on a breadboard ;)

PoC Setup 1

Sometimes, a quick shorted digital interface is all you need for a US QSO in "Solar Minimum" conditions ;)

Shorted-Digital-Interface

RX performance is lovely with LiDi - US @ -4.

US @ -4

50 QSOs were done with LiDi designs in a single day!

50 QSOs with LiDi

BOM Sources
µBITX Aviation Connector Pinout

Clockwise from the notch on the GX-16 connector:

Black + Blue -> Ground

Brown + "Red" -> Speaker

Anti-clockwise from the notch:

Purple -> Mic (TIP)

Orange -> PTT

Brown + "Red" -> Speaker

https://www.hfsignals.com/index.php/ubitx-wire-up/

https://source.android.com/devices/accessories/headset/plug-headset-spec

Tips

Parts

11
QtyValueFootprintReferences
41nFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmCD1, CD2, CD3, CD4
210uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1, C2
110Kfootprints:12_C_Disc_D5.1mm_W3.2mm_P5.00mmRV1
1PC_MICfootprints:C_Disc_D5.1mm_W3.2mm_P5.00mmPCMIC1
1PC_SPKfootprints:C_Disc_D5.1mm_W3.2mm_P5.00mmPCSPK1
1RMIC (12v)footprints:C_Disc_D5.1mm_W3.2mm_P5.00mmRMIC1
1RSPKfootprints:C_Disc_D5.1mm_W3.2mm_P5.00mmRSPK1

More from kholia/Light-Intuitive-Digital-Interface

1
  • 2 layersLiDi, the printed circuit board in 3D

    LiDi

    kholia/Light-Intuitive-Digital-Interface

    LiDi (Light-Intuitive-Digital-Audio-Interface) for µBITX. Note: All the included designs (and some other ones) were simulated in LTspice, and then tested on air. Have fun, and 73!

    13 parts6

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

What parts does the LiDi use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LiDi KiCad files?

From the kholia/Light-Intuitive-Digital-Interface repository on GitHub, at the commit this page was made from: the board is LiDi-v2/LiDi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LiDi design in my own project?

Its repository states no licence, so its author keeps all rights: ask kholia before reusing the design.