Skip to the content
4 layers28 × 42 mmTFT Adapter, the printed circuit board in 3D
Size
28 × 42 mm
Copper layers
4
Thickness
0.99 mm
Parts
16
Nets
15
Pads
53
Tracks, vias
72, 35
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
4 Jul 2024
Updated
22 Feb 2026

Overview

TFT Adapter is an open-source printed circuit board by kfirmaymon84, from the kfirmaymon84/GraviTris repository on GitHub. It is a 4-layer board of 28 × 42 mm with 16 parts on 15 nets, routed with 72 tracks and 35 vias.

It is built around the M20-7810945R. It belongs with the interfaces and adapters boards of this library.

Main components

1

Parts

16
QtyValueFootprintReferences
12~1_MiscParts_footprint:PAD 2x1mmPAD1, PAD2, PAD3, PAD4, PAD5, PAD6, PAD7, PAD8, PAD9, PAD10, PAD11, PAD12
2MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2
1M20-7810945R1_Connectors_SMD:M20-7810945RJ1
1MountingHole1_Holes:12mm_Hole_NoPad_1H3

Similar boards

  • 4 layers24.5 × 14 mmMjuart, the printed circuit board in 3D

    Mjuart

    mjbots/moteus

    Brushless DC motor controller

    16 parts1.4kApache-2.0
  • 4 layers73 × 21.3 mmLa pod mmcx, the printed circuit board in 3D

    La pod mmcx

    azonenberg/starshipraider

    Open hardware test equipment

    16 parts193BSD-3-Clause
  • 4 layers26 × 54.4 mmSombrero MSX Goa'uld, the printed circuit board in 3D

    Sombrero MSX Goa'uld

    jabadiagm/MSXgoauld_tn20k

    MSX Goa'uld board with Tang Nano 20k

    16 parts101GPL-3.0
  • 4 layersCopy1, the printed circuit board in 3D

    Copy1

    embeddedalpha/PCB-Design

    Repository for PCB Design Projects

    16 parts77MIT
  • 4 layers39 × 20 mmMelonHD, the printed circuit board in 3D

    MelonHD

    mackieks/melonHD

    Lontium LT6711A HDMI to USB-C DP Alt Mode Converter Module for portablizers

    16 parts43
  • 4 layers36.2 × 17.9 mmI2c test board, the printed circuit board in 3D

    I2c test board

    mike42/65816-computer

    A 65C816-based homebrew computer (prototype)

    16 parts37
  • 4 layersCm5, the printed circuit board in 3D

    Cm5

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    16 parts29MIT

Questions

How big is the TFT Adapter PCB?

It measures 28 × 42 mm and has 4 copper layers, 0.99 mm thick.

What parts does the TFT Adapter use?

16 parts, built around the M20-7810945R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TFT Adapter KiCad files?

From the kfirmaymon84/GraviTris repository on GitHub, at the commit this page was made from: the board is PCB/TFT_Adapter/TFT_Adapter/TFT_Adapter.kicad_pcb and its schematic PCB/TFT_Adapter/TFT_Adapter/TFT_Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TFT Adapter design in my own project?

Its repository states no licence, so its author keeps all rights: ask kfirmaymon84 before reusing the design.