Skip to the content
2 layers125.8 × 163.6 mmIsobig, the printed circuit board in 3D

The big brother of isoPad

Size
125.8 × 163.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
48
Pads
137
Tracks, vias
92, 2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
9 Dec 2022
Updated
9 Dec 2022

Overview

Isobig is an open-source printed circuit board by keyboard-magpie, from the keyboard-magpie/isobig repository on GitHub, published under the MIT licence. It is a 2-layer board of 125.8 × 163.6 mm with 13 parts on 48 nets, routed with 92 tracks and 2 vias.

README

README.md

isobig

The big brother of isoPad

image

Designed to use either one or two Kailh Bigswitches, with an in-development giant 3d printed stabiliser or "POS" style keycap.

It can use either a pro-micro compatible controller, or a blackpill controller, with standard QMK handwired/onekey firmwares.

There are places for LEDs and lots of breakout for experiments.

PCB files are in PCB folder, Case/Keycap files are in Mechanical folder.

See this link for build pics (I will gradually add captions).

image

Parts

13
QtyValueFootprintReferences
4Jumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm , , ,
3SW_Pushkailh_big_series:kailh_big_series , ,
2Conn_01x20_FemaleConnector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_VerticalJ1, J3
2PinHeader_2x05_P2.54mm_VerticalConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical ,
1BlackPillkicad_blackpill:BlackPill_STLINK
1Conn_01x04_FemaleConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ2

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the Isobig PCB?

It measures 125.8 × 163.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Isobig use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Isobig KiCad files?

From the keyboard-magpie/isobig repository on GitHub, at the commit this page was made from: the board is pcb/isoBig.kicad_pcb and its schematic pcb/isoBig.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Isobig design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).