2 layers96 × 98 mm
Panel
keyakko/mosfet-module
Re-purposing a motherboard MOSFET to serve as an electrical switch.
1,020 partsMIT
2 layers12 × 48 mm
Mosfet module
keyakko/mosfet-moduleRe-purposing a motherboard MOSFET to serve as an electrical switch.
- Size
- 12 × 48 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 7
- Pads
- 62
- Tracks, vias
- 27, 16
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Sep 2023
- Updated
- 4 Sep 2023
Overview
Mosfet module is an open-source printed circuit board by keyakko, from the keyakko/mosfet-module repository on GitHub, published under the MIT licence. It is a 2-layer board of 12 × 48 mm with 17 parts on 7 nets, routed with 27 tracks and 16 vias.
It is built around the CSD17578Q5A. Its parts include 3 resistors, 3 connectors, 2 transistors and 1 diode.
Main components
1README
README.mdmosfet-module
Re-purposing a motherboard MOSFET to serve as an electrical switch.
NOTE
I am a beginner in circuit design, so there may be issues with the wiring.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | , , , , | ||
| 2 | Conn_01x02_Socket | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J2, J3 |
| 2 | MountingHole_3.2mm_M3_Pad_Via | MountingHole:MountingHole_3.2mm_M3_Pad_Via | M3, M3 |
| 2 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 1 | CSD17578Q5A | Package_TO_SOT_SMD:TDSON-8-1 | Q1 |
| 1 | CSD17578Q5A | Package_SO:SOP-8_3.76x4.96mm_P1.27mm | Q2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | R | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | Terminal | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
The 16 most common of 17 parts.
More from keyakko/mosfet-module
1Similar boards
- 4 layers140 × 180 mm
- 6 layers102 × 41.1 mm
Flight Controller
C-yue28/Flight_Controller
6-layer custom flight controller PCB, incorporating a battery management system (BMS), 6-axis IMU, dedicated BLDC/servo control/power lines, and camera lines. Uses the ESP32-WROOM-1 as the central microcontroller.
139 parts - 4 layers
- 4 layers120.3 × 79 mm
NX J401-Adapter v7
RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.
136 parts1 - 2 layers50 × 35 mm
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
Questions
How big is the Mosfet module PCB?
It measures 12 × 48 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mosfet module use?
17 parts, built around the CSD17578Q5A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mosfet module KiCad files?
From the keyakko/mosfet-module repository on GitHub, at the commit this page was made from: the board is mosfet-module.kicad_pcb and its schematic mosfet-module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mosfet module design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).