Skip to the content
4 layers59.7 × 54 mmHeartThrob, the printed circuit board in 3D

A heart-shaped ECG board that turns your heartbeat into sound. Touch the two gold electrodes and it plays your ECG as a high-pitched tone, which a phone or laptop can decode using its microphone.

Size
59.7 × 54 mm
Copper layers
4
Thickness
0.8 mm
Parts
51
Nets
41
Pads
200
Tracks, vias
223, 85
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
4 Oct 2026
Updated
4 Oct 2026

Overview

HeartThrob is an open-source printed circuit board by kevinsu926, from the kevinsu926/HeartThrob repository on GitHub, published under the MIT licence. It is a 4-layer board of 59.7 × 54 mm with 51 parts on 41 nets, routed with 223 tracks and 85 vias.

It is built around the MCP1700T-3002E/TT(MS), MCP73831T-2ACI/OT-HXY and RZM002P02T2L. Its parts include 24 resistors, 16 capacitors, 4 ICs, 3 transistors and 2 connectors.

Main components

3

README

README.md

Heartthrob

A heart-shaped ECG board that turns your heartbeat into sound. Touch the two gold electrodes and it plays your ECG as a high-pitched tone, which a phone or laptop can decode using its microphone. It has no Bluetooth, no Wi-Fi and no firmware.

How it works

mermaid
flowchart LR
    A[Fingers on<br/>electrodes] --> B[AD8233<br/>ECG amplifier]
    B --> C[LTC6990<br/>oscillator]
    C --> D[Piezo<br/>~18.5 kHz tone]
    D --> E[Phone / laptop<br/>microphone]
  1. Pick up the signal. One finger from each hand rests on the gold electrodes on each side of the heart. The tiny voltage your heart produces appears between them.
  2. Amplify it. An AD8233 ECG chip amplifies and filters that signal into a clean waveform.
  3. Turn it into a tone. The waveform controls an LTC6990 oscillator, so the pitch of an 18.5 kHz tone rises and falls with each heartbeat.
  4. Play it. A small piezo plays the tone. It is high enough that most adults can't hear it, but phone microphones can.
  5. Decode it. A phone or laptop listens to the tone, tracks its pitch, and turns it back into a live ECG trace and heart rate.

Simulated decoded ECG and the matching piezo tone frequency

The top trace is what the phone shows: P, QRS and T waves for each beat, with heart rate taken from the time between R peaks. The bottom trace is the same signal as the microphone hears it: a tone near 18.5 kHz whose pitch rises and falls with the ECG. (Simulated example.)

When nobody is touching the electrodes, the board detects that the leads are off and switches the oscillator off to save battery.

Power

The board runs on a small 1S LiPo battery soldered to pads on the back, and charges over USB-C. A 3.0 V regulator powers the circuit, and a P-FET protects it if the battery is connected backwards.

Project structure

  • hardware/Heartthrob/ KiCad 10 project: schematic, 4-layer PCB layout, design rules and custom footprints. Open Heartthrob.kicad_pro.
  • hardware/Heartthrob/Render/ 3D renders of the front and back.
  • hardware/Heartthrob/Documentation/ Schematic PDF, per-layer PCB plots, and earlier design snapshots in Archive/.
  • hardware/Heartthrob/illustrations/ Figures used in this README.

Note: This is a hobby project, not a medical device. Don't use it for diagnosis, and don't wear it while it's plugged in to charge.

Credits

Based on SiBowald's ECG PCB business card, redesigned by Kevin Su as a rechargeable, heart-shaped board.

Parts

51
QtyValueFootprintReferences
610MResistor_SMD:R_0201_0603MetricR1, R2, R3, R10, R11, R12
51MResistor_SMD:R_0201_0603MetricR7, R9, R14, R19, R22
410uFECG_Business_Card_Library:C_0402_1005MetricC2, C24, C27, C28
41uFECG_Business_Card_Library:C_0402_1005MetricC7, C9, C25, C26
3RZM002P02T2LECG_Business_Card_Library:SOT-723Q1, Q2, Q3
2100Resistor_SMD:R_0201_0603MetricR13, R18
2100nFECG_Business_Card_Library:C_0402_1005MetricC1, C23
21nFECG_Business_Card_Library:C_0402_1005MetricC6, C14
2330kResistor_SMD:R_0201_0603MetricR4, R5
25.1kResistor_SMD:R_0201_0603MetricR24, R25
25.6nFECG_Business_Card_Library:C_0402_1005MetricC4, C5
2510kResistor_SMD:R_0201_0603MetricR6, R15
10.22uFECG_Business_Card_Library:C_0402_1005MetricC3
110kResistor_SMD:R_0201_0603MetricR23
11kResistor_SMD:R_0201_0603MetricR26
12.4MResistor_SMD:R_0201_0603MetricR16
13.3uFECG_Business_Card_Library:C_0402_1005MetricC8
1680kResistor_SMD:R_0201_0603MetricR8
182kResistor_SMD:R_0201_0603MetricR17
1AD8233AD8233:20-WLCPS-2MMX1.7MMU1
1LTC6990ECG_Business_Card_Library:SOT95P280X100-6NU4
1LiPo 1Ssmdpads:LiPo_SMD_Pads_2x3mm_P4mmJ1
1MCP1700T-3002E/TTPackage_TO_SOT_SMD:SOT-23U5
1MCP73831T-2ACI/OTPackage_TO_SOT_SMD:SOT-23-5U6
1Red (charging)LED_SMD:LED_0603_1608MetricD1
1Speaker_UltrasoundPiezo:Piezo_12mmLS1
1USB-CConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J2

Similar boards

  • 2 layers42 × 58 mmNF01, the printed circuit board in 3D

    NF01

    feboyfierlyan/nodi

    Nodi — a custom PCB digital companion charm. KiCad hardware, RISC-V firmware, a shared C/WASM core, and an interactive 3D simulator.

    44 parts1
  • 2 layers68 × 31 mmCanalyze, the printed circuit board in 3D

    Canalyze

    kkuchera/canalyze-hw

    Hardware for a CAN to USB bridge.

    40 parts60MIT
  • 2 layers303.2 × 94.5 mmVoyager65, the printed circuit board in 3D

    Voyager65

    foggyflute/Voyager65

    Fully versatile 65% keyboard PCB. Simplified variants available.

    224 parts7GPL-3.0
  • 4 layers65 × 100 mmPGR, the printed circuit board in 3D

    PGR

    Projeto-Guarda-Rios/PCB

    O repositório para a PCB do Projeto Guarda Rios! Inclui todos os ficheiros relacionados com a PCB!

    188 parts2MIT
  • 2 layers45 × 60 mmExtensionBoard, the printed circuit board in 3D

    ExtensionBoard

    ovgu-FINken/DE-HW-Hardware

    Hardware for the DE-Project Hardware Intergration

    53 parts1
  • 4 layers60 × 110 mmNucula v2, the printed circuit board in 3D

    Nucula v2

    zeugmaster/nucula-board

    Nucula Board: an ESP32-C3 hardware prototype with USB-C, PN7160 NFC, OLED and detachable keyboard. KiCad sources and manufacturing files.

    138 parts1CERN-OHL-S-2.0
  • 2 layers32.1 × 37.5 mmSafewise, the printed circuit board in 3D

    Safewise

    coinwise-io/safewise-hardware

    SafeWISE hardware design

    44 partsAGPL-3.0

Questions

How big is the HeartThrob PCB?

It measures 59.7 × 54 mm and has 4 copper layers, 0.8 mm thick.

What parts does the HeartThrob use?

51 parts, built around the MCP1700T-3002E/TT(MS), MCP73831T-2ACI/OT-HXY and RZM002P02T2L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HeartThrob KiCad files?

From the kevinsu926/HeartThrob repository on GitHub, at the commit this page was made from: the board is hardware/Heartthrob/Heartthrob.kicad_pcb and its schematic hardware/Heartthrob/Heartthrob.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the HeartThrob design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).