Skip to the content
4 layers38.6 × 40.3 mmStrato connect, the printed circuit board in 3D

A RF module you can comunicate with over I2C to send AX.25 formatted data over (G)FSK

Size
38.6 × 40.3 mm
Copper layers
4
Thickness
1.6 mm
Parts
49
Nets
47
Pads
177
Tracks, vias
192, 55
Pours
16
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
25 May 2023
Updated
6 Mar 2026

Overview

Strato connect is an open-source printed circuit board by kevinlutzer, from the kevinlutzer/strato-connect repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 38.6 × 40.3 mm with 49 parts on 47 nets, routed with 192 tracks and 55 vias.

It is built around the ATMEGA328PB-MN, TPS565242DRL and RF4463F30, with the CSTNE16M0V530000R0 and FS22N among its other parts. Its parts include 11 resistors, 9 capacitors, 5 connectors, 4 diodes and 3 ICs. It belongs with the radio and wireless boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

5

README

README.md

Strato Connect

Strato Connect V2 PCB

Strato Connect is an RF module used to send AX.25 formatted data with (G)FSK modulation over I2C. Connect a host MCU or computer to this module, and you can communicate with any AX.25 supported receiver up to 100 kilometers line of sight.

Rev 2.0 PCB Todo

  1. The current boost regulator doesn't really work. We are getting voltage drops when there are current spikes.
  2. IRQ was not connected.
  3. RX/TX labels are wrong for the uart port.
  4. Switch the JST connectors to be the 1.0mm pitch connector type used for QT/QWICC
  5. Refactor the code to take an interface in for the I2C Controller instead of passing a function pointer

Code

To compile and run tests use: g++ test/test.cpp ax25/ax25.* test/ax25_test.h -lgtest -std=c++17 && ./a.out To compile code for arduino use: arduino-cli compile -b MiniCore:avr:328 --library=./rf4463,./ax25 --output-dir=bin

Parts

49
QtyValueFootprintReferences
5TestPointTestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mmTP1, TP2, TP3, TP4, TP5
3LEDLED_SMD:LED_0603_1608MetricD1, D2, D3
3MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3
2100nCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC1, C4
21kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR1, R2
21uCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC2, C10
2220Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR6, R7
2Conn_01x04_PinConnector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_HorizontalJ2, J3
1100kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR10
1100uCapacitor_SMD:CP_Elec_5x5.3C7
110kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR3
110uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5
1158kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR8
1220Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5
125.5kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR11
130kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR9
133pCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC11
147uCapacitor_SMD:CP_Elec_5x5.3C8
1ATmega328PB-MPackage_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mmU2
1CSTNE16M0V530000R0Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mmY1
1Conn_01x01_PinTestPoint:TestPoint_Keystone_5019_MinatureJ5
1Conn_01x02_PinConnector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ6
1Conn_CoaxialConnector_Coaxial:SMA_Wurth_60312002114503_VerticalJ1
1FS22NDiode_SMD:D_SOD-123FD4
1G***kibuzzard-64B1A87Bkibuzzard-64B1A87B
1G***kibuzzard-64B1B5E1kibuzzard-64B1B5E1
1G***kibuzzard-64B1A828kibuzzard-64B1A828
1G***kibuzzard-64B1A895kibuzzard-64B1A895
1G***kibuzzard-64B1B6FDkibuzzard-64B1B6FD
1LKevin_Lutzer_Lbr:L_Wurth_WE-LQSH-4025L1
1NPCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC9
1NPResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR12
1RF4463F30Kevin_Lutzer_Lbr:RF4463F30U4
1SW_SPSTButton_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2SW1
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP2
1TPS565242Package_TO_SOT_SMD:SOT-563U1

More from kevinlutzer/strato-connect

2
  • 2 layers96 × 67 mmRp2040-pcb, the printed circuit board in 3D

    Rp2040-pcb

    kevinlutzer/strato-connect

    A RF module you can comunicate with over I2C to send AX.25 formatted data over (G)FSK

    37 partsApache-2.0
  • 2 layers14 × 38.7 mmProgrammer, the printed circuit board in 3D

    Programmer

    kevinlutzer/strato-connect

    A RF module you can comunicate with over I2C to send AX.25 formatted data over (G)FSK

    5 partsApache-2.0

Similar boards

  • 2 layers67 × 100 mmNpr revB, the printed circuit board in 3D

    Npr revB

    slintak/NPR70

    The New Packet Radio on 70 cm band. Based on the project NPR from F4HDK.

    136 parts23GPL-3.0
  • 2 layers79 × 59.5 mmCATSTNC R2, the printed circuit board in 3D

    CATSTNC R2

    CamK06/CATS-Base-Hardware

    An RP2040-based CATS transceiver

    77 parts3
  • 4 layers100 × 100 mmPSU Front End, the printed circuit board in 3D

    PSU Front End

    JorgeMarcano/PSU_Front_End

    PSU Front End

    78 parts
  • 2 layers100 × 100 mmFloppyExerciser, the printed circuit board in 3D

    FloppyExerciser

    schlae/FloppyExerciser

    Simple tool for testing and repairing floppy drives

    118 parts47
  • 2 layers18.6 × 15 mmJoyMegaAvr3, the printed circuit board in 3D

    JoyMegaAvr3

    vanpit/JoyMegaAvr3

    Sega Mega Drive joypad to MSX adapter based on AVR MCU

    18 parts1
  • 2 layers53.3 × 68.6 mmArduino uno, the printed circuit board in 3D

    Arduino uno

    Chicken-Fried/Cave-Uno

    Modernized Arduino Uno R3 compatible board powered by Microchip ATmega328PB. Features driverless USB-C, 1.5A sync buck, ideal-diode OR-ing, dual I2C/SPI/UART, and LiDAR topographic artwork.

    85 parts
  • 4 layers35.8 × 35.8 mmCar display v5, the printed circuit board in 3D

    Car display v5

    jsandmeyer/camaro-aftermarket-radio-aux-display

    Temperature and Reverse Sensor Display for Gen5 Camaro with Aftermarket Radio and Trims

    51 partsMIT

Questions

How big is the Strato connect PCB?

It measures 38.6 × 40.3 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Strato connect use?

49 parts, built around the ATMEGA328PB-MN, TPS565242DRL, RF4463F30 and CSTNE16M0V530000R0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Strato connect KiCad files?

From the kevinlutzer/strato-connect repository on GitHub, at the commit this page was made from: the board is pcb/strato_connect.kicad_pcb and its schematic pcb/strato_connect.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Strato connect design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).