2 layers83.5 × 122 mm
6 layers38.1 × 50.8 mm
Badgesao
kevinjuszczyk/SuperXBit192Lo-fi handheld gaming
- Size
- 38.1 × 50.8 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 269
- Nets
- 262
- Pads
- 1,059
- Tracks, vias
- 984, 556
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Sep 2024
- Updated
- 22 Oct 2024
Overview
Badgesao is an open-source printed circuit board by kevinjuszczyk, from the kevinjuszczyk/SuperXBit192 repository on GitHub, published under the GPL-3.0 licence. It is a 6-layer board of 38.1 × 50.8 mm with 269 parts on 262 nets, routed with 984 tracks and 556 vias.
It is built around the RP2040, LSM6DS3TR-C and TPS61022, with the WS2812B among its other parts. Its parts include 199 diodes, 31 capacitors, 18 resistors, 8 switches and 5 ICs. It belongs with the RP2040 boards of this library.
Main components
4
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
LSM6DS3TR-C
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 3uA 4KB IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳 LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
TPS61022
UncategorisedTexas Instruments
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdSuperXBit192
Lo-fi handheld gaming
Parts
269| Qty | Value | Footprint | References |
|---|---|---|---|
| 192 | WS2812B | kmj_custom:LED_WS2812B-1615_PLCC4_1.6x1.5mm | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +176 |
| 26 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C10, C11, C12, C13, C15, C17, C18, C19, C20, C21, C22, C23, C24, C25 +10 |
| 6 | 5k1 | Resistor_SMD:R_0402_1005Metric | R1, R5, R7, R14, R17, R18 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R12, R16 |
| 3 | 1N4148 | Diode_SMD:D_SOD-523 | D196, D198, D199 |
| 3 | 22u | Capacitor_SMD:C_0805_2012Metric | C16, C27, C28 |
| 3 | 330 | Resistor_SMD:R_0402_1005Metric | R11, R13, R15 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C29, C30 |
| 2 | 33 | Resistor_SMD:R_0402_1005Metric | R8, R10 |
| 2 | LED | Diode_SMD:D_0603_1608Metric | D195, D197 |
| 1 | 12M | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | 1N4007 | Diode_SMD:D_SOD-123F | D194 |
| 1 | 1N5819 | Diode_SMD:D_SOD-323 | D193 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 32Mb QSPI | kmj_custom:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U2 |
| 1 | 33k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 3V3LDO | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | 470n | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | A | kmj_custom:SW_SPST_PTS810 | SW6 |
| 1 | B | kmj_custom:SW_SPST_PTS810 | SW5 |
| 1 | BOOTSEL | kmj_custom:SW_SPST_PTS810 | SW8 |
| 1 | BUZZER | kmj_custom:CMT5023SSMTTR | LS1 |
| 1 | DEBUG | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | DISP_DBG | kmj_custom:PinHeader_1x03_P1.27mm_Vertical | J1 |
| 1 | DOWN | kmj_custom:SW_SPST_PTS810 | SW2 |
| 1 | LEFT | kmj_custom:SW_SPST_PTS810 | SW3 |
| 1 | LSM6DS3TR-C | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U3 |
| 1 | NPN_BEC | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | RESET | kmj_custom:SW_SPST_PTS810 | SW7 |
| 1 | RIGHT | kmj_custom:SW_SPST_PTS810 | SW4 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U6 |
| 1 | Simple_Addon_v2 | kmj_custom:Simple_Addon_v2-SAO-2x3 | X1 |
| 1 | TPS61022 | kmj_custom:Texas_RWU0007A_VQFN-7_2x2mm_P0.5mm | U4 |
| 1 | UP | kmj_custom:SW_SPST_PTS810 | SW1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
Similar boards
- 2 layers38.1 × 133.4 mm
PCBProject
vinnesttree/TixClock
The Tix Clock was originally sold in 2006 by ThinkGeek. Unfortunately, these are no longer sold. This project hopes to try to recreate this iconic clock in a miniature format.
85 partsMIT - 2 layers116.8 × 116.8 mm
Bentoboard
torbers/bentoboard
as many ready-to-use electronics as i could fit on a 4"x4" PCB.
381 parts - 6 layers147 × 17.3 mm
- 2 layers29.2 × 77.9 mm
Lowy na lisa
knspektrum/lowy-na-lisa
Gra terenowa dla dzieci oparta na LoRa - polega na znalezieniu ukrytych nadajnikiów ("lisów") wykorzystując siłę sygnału radiowego
58 parts - 4 layers90 × 77.9 mm
Lighting Tile Circuit V3
OA-Designs/LED-TILE
Modular decorative LED tiles in multiple shapes (hex, square, triangle...) sharing one PCB design. Tiles connect edge-to-edge to share power and sync lighting effects across a network.
77 partsGPL-3.0 - 4 layers69.8 × 35.2 mm
- 4 layers40 × 40 mm
ScrapHawk FC Main
rmingon/ScrapHawk
An ultra-budget, high-performance drone flight controller powered by the RP2040. Featuring a full 9-axis navigation stack, GPS, dual-stage power filtering, and a dual-core FreeRTOS architecture.
53 parts1
Questions
How big is the Badgesao PCB?
It measures 38.1 × 50.8 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Badgesao use?
269 parts, built around the RP2040, LSM6DS3TR-C, TPS61022 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Badgesao KiCad files?
From the kevinjuszczyk/SuperXBit192 repository on GitHub, at the commit this page was made from: the board is kicad/badgesao.kicad_pcb and its schematic kicad/badgesao.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Badgesao design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).