

MinUS
Minimal ultrasound platform
- Size
- 85.6 × 54 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 126
- Nets
- 121
- Pads
- 476
- Tracks, vias
- 1,613, 169
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 17 Sep 2026
- Updated
- 7 Nov 2026
Overview
MinUS is an open-source printed circuit board by kelu124, from the kelu124/minus repository on GitHub. It is a 4-layer board of 85.6 × 54 mm with 126 parts on 121 nets, routed with 1,613 tracks and 169 vias.
It is built around the RP2354A, LP5562TMX/NOPB and TC4427AEUA713, with the A-SP1943B1GHR6C-C01-2T, AP2112K-3.3TRG1 and SN74HC4052PWR(LX) among its other parts. Its parts include 46 capacitors, 42 resistors, 9 ICs, 3 diodes and 3 switches. It belongs with the RP2350 and PIC boards of this library.
Main components
12RP2354A
QFN-60(7x7)150MHz 32 Bit ARM Cortex-M33 Built-in+External Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Built-in general-purpose timer、Integrated LDO、Calendar function、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG) QFN-60(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)LP5562TMX/NOPB
DSBGA-12-40℃~+85℃ 2.7V~5.5V 25.5mA 256Hz、558Hz 4 5% I2C Over-Temperature Protection (OTP) DSBGA-12 LED Drivers ROHSTexas InstrumentsLED DriversTC4427AEUA713
MSOP-8-40℃~+85℃ 1.5A 1.5A 100uA 2 25ns 25ns 4.5V~18V MOSFET MSOP-8 Gate Drivers ROHSMicrochip TechnologyGate DriversA-SP1943B1GHR6C-C01-2T
SMD-4P,1.6x1.5mmLED Indication - DiscreteAmiccAP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN74HC4052PWR(LX)
TSSOP-16-40℃~+105℃ 15ns@4.5V,50pF 160uA 2/8 3V~9V 74HC Dual Supply Level shifting、Break-before-make function TSSOP-16 Signal Switches, Multiplexers, Decoders ROHSlingxingicSignal Switches, Multiplexers, DecodersCC0402KRX7R9BB104
0402100nF 50V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTCONUFL001-SMD-T
SMD-40℃~+90℃ 1 50Ω 6GHz Board Side Male Pin SMD Coaxial Connectors (RF) ROHSTE ConnectivityCoaxial Connectors (RF)PZ254V-11-01P
插件,P=2.54mm-40℃~+105℃ 1 1P 1x1P 2.54mm 2.5mm 250V 3A 3mm 6mm Black Brass Pin Header Through Hole 插件,P=2.54mm Pin Headers ROHSXFCNPin HeadersCSA0402C0G331J500GT
04020402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSHREMultilayer Ceramic Capacitors MLCC - SMD/SMTTS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile SwitchesRCS04020000Z0ED
0402-55℃~+155℃ 0Ω 200mW 50V Thick Film Resistor 0402 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount
README
README.mdminus
A minimal, single-channel, low-cost, open-source ultrasound pulse-echo platform — built as a conference-workshop badge.
minus drives one piezo transducer with a high-voltage pulse, amplifies and digitizes
the returning echo, and streams the raw data to a host. It is designed to be cheap,
small, simple, and hackable — a badge attendees can use in an ultrasound-conference
workshop (e.g. muscle-contraction monitoring, A-/M-mode) and then extend and
experiment with (coded excitation, on-device DSP, add-on boards).
⚠️ Status: early design. This repository currently holds the requirements, a survey of comparable systems, a component trade study, and reference designs — not yet a finished board. Non-clinical, for research / education / NDT only; not a medical device.
What it is (at a glance)
- MCU: Raspberry Pi RP2350 — precise pulse timing + fast ADC capture via PIO.
- Signal: 3–4 MHz piezo (provided with the kit), raw RF A-mode + M-mode.
- Front end: unipolar HV pulser (bipolar option) → T/R switch → VGA/TGC → external high-speed ADC. Reuses proven blocks from the author's open boards.
- Badge: on-board USB-C (host + power), RGB LED + small OLED for standalone display, Raspberry-Pi 40-pin extension header, transducer via SMA / header / uFL, friendly silkscreen + test points, OSHWA certification planned.
- Open: open hardware + firmware + host software; designed for JLCPCB fabrication.
Repository map
| Path | What's there |
|---|---|
requirements.md | The design requirements (MoSCoW), with open decisions. |
analysis.md | Architecture analysis — integrated vs external-ADC routes; pulser and gain options. |
options.md + options_prices.csv | Component trade study (pulser / gain / ADC) with LCSC-referenced pricing. |
systems/ | Survey of ~19 comparable ultrasound systems (datasheets, literature, by-IC index). |
design/ | Reference design files (un0rick, lit3rick, pic0rick, Open Echo, BioGAP shield). |
pdfs/ | Source papers and component datasheets. |
docs/claude/ | Working notes: session logs, decision memory, TODO/DONE, changelog. |
Lineage & credits
minus builds on the open single-channel ultrasound work of Luc Jonveaux (kelu124) —
echomods/Murgen,
un0rick,
lit3rick, and
pic0rick — reusing their proven building blocks
to reduce risk. See systems/ for the broader field survey.
License
Intended to be released as open hardware + open software (OSHWA certification planned), following the licensing of the boards above.
Parts
126| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 100nF | EasyEDA:C0402 | C14, C15, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C33, C34, C35 +5 |
| 16 | 10KΩ | EasyEDA:R0402 | R15, R16, R18, R20, R31, R32, R33, R34, R35, R36, R37, R38, R65, R66, R69, R70 |
| 6 | 1nF | EasyEDA:C0402 | C29, C30, C31, C36, C37, C38 |
| 5 | CONUFL001-SMD-T | EasyEDA:IPEX-SMD_3P-L2.6-W2.6-LS3.0 | RF1, RF20, RF21, RF23, RF24 |
| 5 | PZ254V-11-01P | EasyEDA:HDR-TH_1P-P2.54-V-M | H5, H7, H8, H10, H11 |
| 4 | 1uF | EasyEDA:C0402 | C4, C7, C8, C9 |
| 4 | 4.7uF | EasyEDA:C0402 | C12, C13, C16, C17 |
| 4 | CSA0402C0G331J500GT | EasyEDA:C0402 | C1, C3, C32, C40 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 3 | 1kΩ | EasyEDA:R0402 | R9, R10, R13 |
| 3 | TS-1088-AR02016 | EasyEDA:SW-SMD_L3.9-W3.0-P4.45 | SW1, SW2, SW3 |
| 2 | 0Ω | EasyEDA:R0402 | R22, R23 |
| 2 | 100Ω | EasyEDA:R0402 | R67, R68 |
| 2 | 10Ω | EasyEDA:R0402 | R4, R5 |
| 2 | 132414 | EasyEDA:SMA-SMD_132414 | RF3, RF22 |
| 2 | 15pF | EasyEDA:C0402 | C10, C11 |
| 2 | 1KΩ | EasyEDA:R0402 | R28, R30 |
| 2 | 22Ω | EasyEDA:R0402 | R11, R12 |
| 2 | 56pF | EasyEDA:C0402 | C86, C87 |
| 2 | 5K1 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | FRC0402F6801TS | EasyEDA:R0402 | R3, R24 |
| 2 | RC0402FR-072K2L | EasyEDA:R0402 | R1, R26 |
| 2 | RC0402FR-074K7L | EasyEDA:R0402 | R2, R25 |
| 1 | 0Ω | EasyEDA:R1206 | R8 |
| 1 | 10nF | EasyEDA:C0402 | C6 |
| 1 | 12MHz | EasyEDA:OSC-SMD_4P-L3.2-W2.5-BL_SIT8008BI | U7 |
| 1 | 3.3uH | EasyEDA:IND-SMD_L2.0-W1.6_AOTA-B201610S3R3-101-T | L1 |
| 1 | 330Ω | EasyEDA:R0402 | R21 |
| 1 | 33Ω | EasyEDA:R0402 | R14 |
| 1 | 4.7kΩ | EasyEDA:R0603 | R17 |
| 1 | 442Ω | EasyEDA:R0402 | R19 |
| 1 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | A-SP1943B1GHR6C-C01-2T | EasyEDA:LED-SMD_4P-L1.6-W1.5-BL_A-SP1943B1GHR6C-C01-2T | U4 |
| 1 | AP2112K-3.3TRG1 | EasyEDA:SOT-25-5_L2.9-W1.6-P0.95-LS2.8-BL | U6 |
| 1 | BAT54S_C916425 | EasyEDA:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | D1 |
| 1 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | BGA2817,115 | EasyEDA:SC-70-6_L2.0-W1.3-P0.65-LS2.1-BR | U2 |
| 1 | CC0402KRX7R9BB471 | EasyEDA:C0402 | C2 |
| 1 | IRLML2244TRPBF | EasyEDA:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | Q1 |
| 1 | IRLML6244TRPBF | EasyEDA:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q2 |
| 1 | KT-0603R | EasyEDA:LED-SMD_L1.6-W0.8-R-RD | LED1 |
| 1 | LP5562TMX/NOPB | EasyEDA:DSBGA-12_L1.7-W1.3-R3-C4-P0.40-TL | U5 |
| 1 | PIC32AK1216GC41048-I_PT | EasyEDA:QFP50P900X900X120-48N | U9 |
| 1 | PZ254V-12-18P | EasyEDA:HDR-TH_18P-P2.54-V-M-R2-C9-S2.54 | H6 |
| 1 | RP2354A | EasyEDA:QFN-60_L7.0-W7.0-P0.40-TL-EP3.4 | U8 |
| 1 | SN74HC4052PWR | EasyEDA:TSSOP-16_L5.0-W4.3-P0.65-LS6.4-BL | U1 |
| 1 | SX2M32.768KM20F30TNN | EasyEDA:OSC-SMD_4P-L2.5-W2.0-BL | OSC1 |
| 1 | TC4427AEUA713 | EasyEDA:MSOP8_MC_MCH-M | U3 |
| 1 | TYPE-C-31-M-12 | EasyEDA:USB-C_SMD-TYPE-C-31-M-12_1 | USBC1 |
| 1 | X9555WV-2X20-6TV01 | EasyEDA:IDC-TH_40P-P2.54_X9555WV-2X20-6TV01 | CN1 |
More from kelu124/minus
1- 4 layers200 × 100 mm

Similar boards
- 4 layers80 × 60 mm

Bee core v01-kicad9-bringup
TheronRogers/bee-whoop-tailsitter
Bee whoop-scale dual-motor dual-elevon tailsitter — VibeCAD airframe + Bee Core RP2350 bring-up electronics
69 parts - 4 layers130 × 125 mm

Flatburn V5
MIT-Senseable-City-Lab/flatburn-lte
Part of the City Scanner project at MIT Senseable City Lab, Flatburn is an open-source, solar-powered, modular sensing platform that can be easily deployed on road vehicles to collect various environmental data.
587 parts1MIT - 2 layers45 × 75 mm

- 4 layers63.5 × 44.5 mm

- 4 layers15 × 29.2 mm

Fuimini V2
Zipra1/Fuimini-V2
nRF flavoured SlimeVR-compatible trackers. Now with higher volume production in mind!
62 parts3CERN-OHL-S-2.0 - 2 layers15.8 × 20.3 mm

C6WiFI
AngeloDuenas/SmartwatchProject
This is an ESP32 demo project showcasing LVGL v7 with support for several display controllers and touch controllers. The demo application is the lvdemowidgets project from the lvexamples repository.
26 partsMIT - 2 layers50 × 100 mm

Spark AE PCB
clectric-diy/Spark-AE
Spark-AE is a synth module designed for the AE Modular format. It is based on the Daisy Seed embedded DSP platform.
162 partsCERN-OHL-S-2.0 - 2 layers12 × 13 mm

LED RGB-3.3V
clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.
7 partsCERN-OHL-W-2.0
Questions
How big is the MinUS PCB?
It measures 85.6 × 54 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MinUS use?
126 parts, built around the RP2354A, LP5562TMX/NOPB, TC4427AEUA713 and A-SP1943B1GHR6C-C01-2T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MinUS KiCad files?
From the kelu124/minus repository on GitHub, at the commit this page was made from: the board is hardware/minUS_07112026/minUS.kicad_pcb and its schematic design/open-echo/TUSS4470_shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MinUS design in my own project?
Its repository states no licence, so its author keeps all rights: ask kelu124 before reusing the design.