Skip to the content
2 layers56.5 × 22.9 mmGw-26, the printed circuit board in 3D

The old Kickstart switcher documentation is here.

Size
56.5 × 22.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
15
Pads
76
Tracks, vias
70, 7
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
22 Jul 2015
Updated
23 Dec 2021

Overview

Gw-26 is an open-source printed circuit board by keirf, from the keirf/pcb-projects repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 56.5 × 22.9 mm with 7 parts on 15 nets, routed with 70 tracks and 7 vias.

README

README.md

PCB Projects: KiCad Designs for Retro Projects

Documentation

The old Kickstart switcher documentation is here.

Parts

7
QtyValueFootprintReferences
41KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder, , ,
1Housings_DIP:DIP-40_W15.24mm
11.5KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderUSBPU
1Conn_02x13_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical

More from keirf/pcb-projects

12
  • 2 layers88.9 × 98.4 mmKickstart switcher-12up, the printed circuit board in 3D

    Kickstart switcher-12up

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    197 parts108CC0-1.0
  • 2 layers87 × 99.1 mmPanels, the printed circuit board in 3D

    Panels

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    47 parts108CC0-1.0
  • 2 layers99.1 × 99.7 mm27c400-ff amstrad, the printed circuit board in 3D

    27c400-ff amstrad

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    42 parts108CC0-1.0
  • 2 layers96.5 × 99.7 mm27c322-2up, the printed circuit board in 3D

    27c322-2up

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    35 parts108CC0-1.0
  • 2 layers96.5 × 86.4 mm27c322-v2-2up, the printed circuit board in 3D

    27c322-v2-2up

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    22 parts108CC0-1.0
  • 2 layers20.3 × 31.1 mmKickstart switcher, the printed circuit board in 3D

    Kickstart switcher

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    15 parts108CC0-1.0
  • 2 layers96.5 × 99.7 mm27c160-2up, the printed circuit board in 3D

    27c160-2up

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    14 parts108CC0-1.0
  • 2 layers99.1 × 99.7 mm27c400-amstrad-2up, the printed circuit board in 3D

    27c400-amstrad-2up

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    14 parts108CC0-1.0
  • 2 layers47 × 99.7 mm27c322, the printed circuit board in 3D

    27c322

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    11 parts108CC0-1.0
  • 2 layers47 × 86.4 mm27c322, the printed circuit board in 3D

    27c322

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    10 parts108CC0-1.0
  • 2 layers61 × 22.9 mmGreaseweazle, the printed circuit board in 3D

    Greaseweazle

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    8 parts108CC0-1.0
  • 2 layers47 × 99.7 mm27c160, the printed circuit board in 3D

    27c160

    keirf/pcb-projects

    The old Kickstart switcher documentation is here.

    6 parts108CC0-1.0

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the Gw-26 PCB?

It measures 56.5 × 22.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Gw-26 use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gw-26 KiCad files?

From the keirf/pcb-projects repository on GitHub, at the commit this page was made from: the board is gw-26/GW.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gw-26 design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).