
TinyFPGA B
tinyfpga/TinyFPGA-B-Series
Open source design files for the TinyFPGA B-Series boards.

Up5k v0 is an open-source printed circuit board by kehribar, from the kehribar/ice40helper repository on GitHub. It is a 2-layer board of 76.8 × 48.3 mm with 49 parts on 68 nets, routed with 627 tracks and 129 vias.
It is built around the ICE40UP5K-SG48ITR50, MIC5365-1.2YC5-TR and MIC5504-3.3YM5-TR. Its parts include 18 capacitors, 12 resistors, 5 ICs, 4 diodes and 3 connectors. It belongs with the STM32 and FPGA and CPLD boards of this library.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | .1u | Capacitor_SMD:C_0805_2012Metric | C2, C3, C5, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18 |
| 9 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R3, R4, R6, R7, R8, R10, R11, R12 |
| 5 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C1, C4, C6, C7, C8 |
| 4 | LED_Small_ALT | LED_SMD:LED_0805_2012Metric_Castellated | D1, D2, D3, D4 |
| 2 | L | Resistor_SMD:R_0805_2012Metric | L1, L2 |
| 2 | SW_Push | tinyfpga:PTS_810_SMT_Switch | SW1, SW2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 470K | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | ASE-xxxMHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | AT25SF081 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_02x17_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x17_P2.54mm_Vertical | J2 |
| 1 | ICE40UP5K-SG48ITR | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | MIC5365-1.2YC5-TR | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U5 |
| 1 | MIC5504-3.3YM5-TR | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U4 |
| 1 | STM32F042F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | USB_B_Mini | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |

tinyfpga/TinyFPGA-B-Series
Open source design files for the TinyFPGA B-Series boards.




nekonaute/pogobot
Pogobot is an open-source open-hardware robotic platform for swarm robotics

transistorfet/fidget
An FPGA board that can interface to the Computie expansion bus using an iCE40HX1K

vatsgoyal27/circuitbending_camera
building a digicam ith points exposed for experimental circuit bending

It measures 76.8 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the ICE40UP5K-SG48ITR50, MIC5365-1.2YC5-TR and MIC5504-3.3YM5-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kehribar/ice40helper repository on GitHub, at the commit this page was made from: the board is hardware/up5k_v0/up5k_v0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kehribar before reusing the design.