
Base expansion pcb
keesj/fp2_extension_sample
Sample open and 3d printable case for the FP2

Sample open and 3d printable case for the FP2
Fp2 usb breakout is an open-source printed circuit board by keesj, from the keesj/fp2_extension_sample repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 17.8 × 48.8 mm with 2 parts on 5 nets, routed with 12 tracks and 2 vias.
It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | FP2-MODULE_5-CONNECTOR | fairphone:fp2_p5_connector | P1 |
| 1 | USB_A | Connect:USB_A | P2 |

keesj/fp2_extension_sample
Sample open and 3d printable case for the FP2

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 17.8 × 48.8 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the keesj/fp2_extension_sample repository on GitHub, at the commit this page was made from: the board is usb_breakout_pcb/fp2_usb_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).