2 layers32.5 × 25.1 mm
Ledstrip controller
wipmate/electronics
A collection of small ESP32-powered PCBs for use in smart home appliances.
16 parts
2 layers
Simple arduino nano board with digital pot to adapt vehicle steering wheel buttons to work with aftermarket stereo's with a remote input
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 35
- Pads
- 47
- Tracks, vias
- 48, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Nov 2023
- Updated
- 28 Jan 2026
Overview
SWC nano is an open-source printed circuit board by kcorbett95, from the kcorbett95/Steering-Wheel-Control-Adapter repository on GitHub. It is a 2-layer board with 3 parts on 35 nets, routed with 48 tracks and 0 vias.
It is built around the R-785.0-0.5. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | MCP4251-xxxx-P | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | R-785.0-0.5 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U2 |
Similar boards
- 2 layers40 × 52 mm
HRU SCB M5Atom Entry
rmf-hru-wg/HRUServoController
UEC RMF HRU Servo Controller Board RP2040 ===
31 partsCC-BY-4.0 - 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
Questions
What parts does the SWC nano use?
3 parts, built around the R-785.0-0.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SWC nano KiCad files?
From the kcorbett95/Steering-Wheel-Control-Adapter repository on GitHub, at the commit this page was made from: the board is SWC nano/SWC nano.kicad_pcb and its schematic SWC nano/SWC nano.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SWC nano design in my own project?
Its repository states no licence, so its author keeps all rights: ask kcorbett95 before reusing the design.