
Easyduino ESP32
Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

Sensormodule is an open-source printed circuit board by KCHBloem, from the KCHBloem/Sensormodule-PCB repository on GitHub. It is a 4-layer board of 20 × 15 mm with 29 parts on 34 nets, routed with 118 tracks and 9 vias.
Its parts include 17 capacitors, 3 resistors, 3 inductors, 2 ICs and 2 crystals.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Kylian:[0402] Capacitor | C1, C2, C3, C4 |
| 2 | 11pF | Kylian:[0402] Capacitor | C10, C11 |
| 2 | 16pF | Kylian:[0402] Capacitor | C12, C13 |
| 1 | 1.5pF | Kylian:[0402] Capacitor | C16 |
| 1 | 10k | Kylian:[0402] Resistor | R1 |
| 1 | 10nF | Kylian:[0402] Capacitor | C8 |
| 1 | 10uF | Kylian:[0603] Capacitor | C6 |
| 1 | 16MHz | Kylian:[XTAL] 2mmx1.6mm | X2 |
| 1 | 1M | Kylian:[0402] Resistor | R3 |
| 1 | 1nF | Kylian:[0402] Capacitor | C7 |
| 1 | 1pF | Kylian:[0402] Capacitor | C17 |
| 1 | 1uF | Kylian:[0402] Capacitor | C5 |
| 1 | 2.2nF | Kylian:[0402] Capacitor | C15 |
| 1 | 2.7nH | Kylian:[0402] Inductor | L3 |
| 1 | 22k | Kylian:[0402] Resistor | R2 |
| 1 | 3.9nH | Kylian:[0402] Inductor | L2 |
| 1 | 32.768KHz | Kylian:[XTAL] 2.05mmx1.2mm | X1 |
| 1 | 33nF | Kylian:[0402] Capacitor | C9 |
| 1 | 4.7pF | Kylian:[0402] Capacitor | C14 |
| 1 | 8.2nH | Kylian:[0402] Inductor | L1 |
| 1 | RESET | Kylian:[SW] 4.1mmx2.8mm | S1 |
| 1 | [Header]_4-Pos_1.27mm | Kylian:[Header] 1.27mm 4-Position | J1 |
| 1 | ~ | Kylian:[QFN20] | U2 |
| 1 | ~ | Kylian:[UFQFPN28] | U1 |

Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards


EvanKrall/pipad
A PCB for putting a Raspberry Pi CM4 inside a 1st-generation iPad.


alvarop/chaac
This is a work in progress for a wireless weather station project.


colinleroy/BurgerDisk
A daisy-chainable Smartport hard drive for the Apple II

esden/glasgow-addons
Various interface addon boards and expansions for the Glasgow Digital Interface Explorer
It measures 20 × 15 mm and has 4 copper layers, 1.61 mm thick.
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KCHBloem/Sensormodule-PCB repository on GitHub, at the commit this page was made from: the board is sensormodule.kicad_pcb and its schematic sensormodule.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KCHBloem before reusing the design.