

ITC18-Breakout
This circuit board allows the use of additional TTL Inputs and Outputs from the ITC18, available from Heka
- Size
- 91.8 × 118.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 21
- Pads
- 139
- Tracks, vias
- 238, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 12 Aug 2014
- Updated
- 12 Aug 2014
Overview
ITC18-Breakout is an open-source printed circuit board by kbellve, from the kbellve/ITC18-Breakout repository on GitHub. It is a 2-layer board of 91.8 × 118.4 mm with 23 parts on 21 nets, routed with 238 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
README
README.mdThis board was codeveloped by Joseph Bellve and Kishore Rao as a student Summer project.
The purpose of the board is to allow the use of either:
ITC18 Bottom 50 pin Connector:
TTL outputs 4-7 and TTL Inputs 4-7ITC18 Top 50 pin Connector:
TTL Outputs 8 - 15 sent to a parallel connector to control a Sutter 10-2 filter wheel.
or
TTL Outputs 12-15 sent to BNC
TTL Inputs 12-15 sent to BNCBOM: http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=0ec57dda47 "Mouser"
Karl Bellve
Biomedical Imaging Group
Molecular Medicine
University of Massachusetts Medical School
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_1 | 3.5_MM_DRILLHOLE | P18, P19, P20, P21 |
| 1 | 3 | C2_5mm | P3 |
| 1 | 7 | C2_5mm | P7 |
| 1 | ITC-18 | HE10_50D | P1 |
| 1 | OSHW-logo_silkscreen-front_15mm | OSHW-logo_silkscreen-front_15mm | G*** |
| 1 | Sutter 10-2 | DB25FD | J1 |
| 1 | TTL 0 | C2_5mm | P2 |
| 1 | TTL 1 | C2_5mm | P6 |
| 1 | TTL 12/4 INPUT | BNC-S | P16 |
| 1 | TTL 13/5 INPUT | BNC-S | P12 |
| 1 | TTL 14/6 INPUT | BNC-S | P8 |
| 1 | TTL 15/7 INPUT | BNC-S | P4 |
| 1 | TTL 2 | C2_5mm | P10 |
| 1 | TTL 3 | C2_5mm | P14 |
| 1 | TTL 4 | C2_5mm | P15 |
| 1 | TTL 4 OUTPUT | BNC-S | P17 |
| 1 | TTL 5 | C2_5mm | P11 |
| 1 | TTL 5 OUTPUT | BNC-S | P13 |
| 1 | TTL 6 OUTPUT | BNC-S | P9 |
| 1 | TTL 7 OUTPUT | BNC-S | P5 |
Similar boards
- 2 layers65 × 56 mm

- 2 layers14 × 100 mm

Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm

- 2 layers138.8 × 89.8 mm

- 2 layers32.9 × 53.3 mm

- 2 layers35.5 × 50 mm

- 2 layers19 × 19 mm

- 2 layers88.5 × 28 mm

ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the ITC18-Breakout PCB?
It measures 91.8 × 118.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ITC18-Breakout use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ITC18-Breakout KiCad files?
From the kbellve/ITC18-Breakout repository on GitHub, at the commit this page was made from: the board is ITC-18-BREAKOUT.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ITC18-Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask kbellve before reusing the design.