2 layers89 × 100 mm
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!
132 parts388
2 layers381 × 147 mm
GH80-ANW
kayJaytwo/Cherry_Kbrd_AnwModified Cherry 104 keyboard schematic and PCB project taken from GH80-1300
- Size
- 381 × 147 mm
- Copper layers
- 2
- Thickness
- 1.2 mm
- Parts
- 257
- Nets
- 149
- Pads
- 1,411
- Tracks, vias
- 1,467, 59
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Jul 2025
- Updated
- 29 Jul 2025
Overview
GH80-ANW is an open-source printed circuit board by kayJaytwo, from the kayJaytwo/Cherry_Kbrd_Anw repository on GitHub. It is a 2-layer board of 381 × 147 mm with 257 parts on 149 nets, routed with 1,467 tracks and 59 vias.
It is built around the ATMEGA32U4. Its parts include 124 switches, 108 diodes, 7 resistors, 7 inductors and 6 capacitors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdProject for creation od customised 104 key Cherry keyboard, created from GH80-1800 project
Parts
257| Qty | Value | Footprint | References |
|---|---|---|---|
| 108 | D | myLib:hyb_DIODE | D1, D10, D11, D12, D13, D14, D100, D101, D102, D103, D104, D105, D107, D108, D109, D110 +92 |
| 101 | KEYSW | myLib:CHERRY_PLATE_100H | K1, K10, K11, K12, K13, K14, K100, K101, K102, K103, K104, K105, K107, K108, K109, K110 +85 |
| 6 | KEYSW | Keeb_switches:CHERRY_PLATE_150H | K45, K62, K85-2, K86-2, K98-1, K99-1 |
| 5 | KEYSW | Keeb_switches:CHERRY_PLATE_125H | K67-1, K85-1, K86-1, K89-1, K96-1 |
| 4 | 0.1u | myLib:C_0805 | C103, C104, C105, C106 |
| 4 | LED | Keeb_switches:CHERRY_MX_LED | L1-1, L2-1, L2-2, L3-1 |
| 3 | 1k | myLib:R_0805 | R106, R107, R108 |
| 3 | KEYSW | Keeb_switches:CHERRY_PCB_200H_V | K55-1, K73-1, K77 |
| 3 | LED | myLib:LED_D3.0mm | L1, L2, L3 |
| 2 | 10k | myLib:R_0805 | R101, R102 |
| 2 | 22 | myLib:R_0805 | R103, R104 |
| 2 | KEYSW | Keeb_switches:CHERRY_PLATE_175H | K67, K95 |
| 2 | KEYSW | Keeb_switches:CHERRY_PCB_225H | K73, K89 |
| 1 | 1u | myLib:C_0805 | C108 |
| 1 | 4.7u | myLib:C_0805 | C107 |
| 1 | ATmega32U4 | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | ISP | Keeb_components:isp_standard | J2 |
| 1 | KEYSW | Keeb_switches:CHERRY_PCB_600H | K97 |
| 1 | KEYSW | Keeb_switches:CHERRY_PCB_700H | K97-2 |
| 1 | KEYSW | Keeb_switches:CHERRY_PCB_625H | K97-1 |
| 1 | KEYSW | Keeb_switches:CHERRY_PCB_200H | K18 |
| 1 | SW_Push | myLib:SW_SPST_TL3342 | SW1 |
| 1 | USB Header | myLib:USB_breakout | J3 |
| 1 | USB_mini_micro_B | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |
| 1 | XTAL_GND | myLib:Resonator_SMD_muRata_CSTNExxV-3Pin-p1.2 | X1 |
Questions
How big is the GH80-ANW PCB?
It measures 381 × 147 mm and has 2 copper layers, 1.2 mm thick.
What parts does the GH80-ANW use?
257 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GH80-ANW KiCad files?
From the kayJaytwo/Cherry_Kbrd_Anw repository on GitHub, at the commit this page was made from: the board is GH80-ANW.kicad_pcb and its schematic GH80-ANW.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GH80-ANW design in my own project?
Its repository states no licence, so its author keeps all rights: ask kayJaytwo before reusing the design.
Similar boards
- 2 layers22.9 × 36.7 mm
Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152 - 2 layers303.6 × 96.1 mm
- 2 layers114.9 × 77 mm
- 2 layers444.1 × 151.2 mm
Gh80-3003
evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)
287 parts69CC-BY-SA-4.0 - 2 layers232.2 × 76.7 mm
- 2 layers373.2 × 131.8 mm
- 2 layers17.8 × 33 mm
