
Haxophone001
cardonabits/haxo-hw
Haxophone, an electronic musical instrument that resembles a saxophone

Just a simple nfc card made in pcb for use as a buseniss card
NFC BusinessCard is an open-source printed circuit board by kattemjau, from the kattemjau/NfcCard repository on GitHub. It is a 2-layer board of 54 × 85.6 mm with 92 parts on 8 nets, routed with 27 tracks and 1 via.
Its parts include 1 capacitor, 1 resistor and 1 diode. It belongs with the radio and wireless boards of this library.
Just a simple nfc card made in pcb for use as a buseniss card
Inspired by: https://www.instructables.com/id/PCB-Business-Card-With-NFC/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 85 | LOGO | NFC_BusinessCard:hex1 | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +69 |
| 1 | 220 nf | NFC_BusinessCard:C0603 | C1 |
| 1 | 25X48MM_NFC_ANTENNA | NFC_BusinessCard:25X48MM_NFC | ANT1 |
| 1 | 47 Ω | NFC_BusinessCard:R0603 | R1 |
| 1 | LEDSML0805 | NFC_BusinessCard:SML0805 | LED1 |
| 1 | LOGO | NFC_BusinessCard:hex | G*** |
| 1 | LOGO | NFC_BusinessCard:nfcsmall | G*** |
| 1 | NT3H | NFC_BusinessCard:XQFN8 | NT3H1101 |

cardonabits/haxo-hw
Haxophone, an electronic musical instrument that resembles a saxophone

Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

mmccoyd/hillside
Family of split ergonomic keyboards with three rows of six or five keys and a generous thumb arc

ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware

nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT



cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
It measures 54 × 85.6 mm and has 2 copper layers, 1.6 mm thick.
92 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kattemjau/NfcCard repository on GitHub, at the commit this page was made from: the board is NFC_BusinessCard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kattemjau before reusing the design.